Re: flickering video on z100

Article View: comp.sys.zenith.z100

Article #299

Back to comp.sys.zenith.z100 Previous Next

#299

From: Tim McCaffrey
Date: Wed, 16 Dec 1992 00:15

10 lines
856 bytes

I would try replacing the monitor.  It sounds to me like an internal
oscillator is going in the monitor.  If another monitor exhibits the
same behaviour, I would look for some external factor, like an   
unsheilded speaker or motor near the monitor (with 3 feet).  The 
last thing I would check is the power supply on the Z110.

				Good Luck.

				Tim McCaffrey
					Z100 programmer at large.

Technical Details

Message-ID: <1992Dec16.001542.4152@asns.tredydev.Unisys.COM>

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!rpi!batcomputer!cornell!rochester!udel!gvls1!tredysvr!asns!tmm

References: <1992Dec15.001931.15612@u.washington.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!rpi!batcomputer!cornell!rochester!udel!gvls1!tredysvr!asns!tmm
From: tmm@asns.tredydev.Unisys.COM (Tim McCaffrey)
Newsgroups: comp.sys.zenith.z100
Subject: Re: flickering video on z100
Message-ID: <1992Dec16.001542.4152@asns.tredydev.Unisys.COM>
Date: 16 Dec 92 00:15:42 GMT
References: <1992Dec15.001931.15612@u.washington.edu>
Distribution: usa
Organization: Unisys Corporation, Devon Engineering Offices
Lines: 10

Reply to Parent Message