Article View: comp.sys.zenith
Article #148Re: question about 3.5 and 5.25 disk drives
From: Michel Biedermann
Date: Fri, 13 Apr 1990 22:52
Date: Fri, 13 Apr 1990 22:52
16 lines
1226 bytes
1226 bytes
In article <2625F3DA.74F5@deimos.cis.ksu.edu>, fong@ksuvax1.cis.ksu.edu (Eric Fong) writes: > I have a 248/12 model with a 3.5 disk drive as the A drive and 5.25 as > the B drive, is there a simple to switch the disk assignment (i.e. change > the 5.25 drive to A drive)? Since I have to load MINIX OS on it, and While you can't truly switch disk drive assignments, probably the easiest solution to your problem is to use ASSIGN X Y, where X while be assigned or addressed as drive Y. In your case, you will want to ASSIGN B A. From now on (until you correct this) every time you will try to access drive A, the light on your drive B will come on. I hope this helps... Michel Biedermann michelbi@oregon.uoregon.edu U. of Oregon Zenith Student Rep.
Technical Details
Message-ID:
<19049@oregon.uoregon.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!cs.uoregon.edu!oregon!michelbiReferences:
<2625F3DA.74F5@deimos.cis.ksu.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!cs.uoregon.edu!oregon!michelbi From: MICHELBI@oregon.uoregon.edu (Michel Biedermann) Newsgroups: comp.sys.zenith Subject: Re: question about 3.5 and 5.25 disk drives Message-ID: <19049@oregon.uoregon.edu> Date: 13 Apr 90 22:52:25 GMT References: <2625F3DA.74F5@deimos.cis.ksu.edu> Distribution: usa Organization: University of Oregon Lines: 16