🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.zenith
1 messages
1 total messages Started by Dick O'Connor Tue, 29 May 1990 17:25
Lantastic, Z248 problem solved
#171
Author: Dick O'Connor
Date: Tue, 29 May 1990 17:25
25 lines
1999 bytes
For those who were interested in the problems I had running a small
LANtastic network (the two Zenith Z248's kept going to sleep and
"dropping off" without warning), we believe we've solved the problem.

Early on, I suspected a faulty NIC (the cards were Artisoft's AE2
Ethernet cards), so I swapped two of them.  It turns out I swapped
the two (out of seven) faulty NICs that we had, and they both happened
to be installed in the Zenith machines.  Go figure.

Anyway, some more rigorous swapping identified the two NICs as flaky,
and they've been returned for exchange.  The Zeniths have been up and
running smoothly with different NICs ever since.  It was sheer coincidence
that led me to attribute the problem to the Zenith hardware.

But I don't apologize to ZDS.  It keeps them honest.  And Yes, I'd
certainly buy their hardware again!

"Moby" Dick O'Connor                          ** The only difference between
Washington Department of Fisheries            ** a lazy man on a riverbank
Olympia, Washington  98504                    ** and a fisherman is a pole
Internet Mail: djo7613@hardy.u.washington.edu ** and a length of string.
"Moby" Dick O'Connor                          ** The only difference between
Washington Department of Fisheries            ** a lazy man on a riverbank
Olympia, Washington  98504                    ** and a fisherman is a pole
Internet Mail: djo7613@hardy.u.washington.edu ** and a length of string.
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads