Thread View: comp.sys.zenith
2 messages
2 total messages
Started by Dan Mandell
Thu, 31 Jan 1991 01:47
EasyPC HD Upgrade?
Author: Dan Mandell
Date: Thu, 31 Jan 1991 01:47
Date: Thu, 31 Jan 1991 01:47
7 lines
803 bytes
803 bytes
A student who bought an EasyPC with dual floppy drives a couple years ago, now wants to add a hard disk. I know of no way to do this, but thought I would check with Netlanders to be sure. Dan Mandell Saint Mary's College Computer Center Internet: mandell@bach.helios.nd.edu
Re: EasyPC HD Upgrade?
Author: Rocco Calderone
Date: Fri, 01 Feb 1991 18:33
Date: Fri, 01 Feb 1991 18:33
16 lines
1425 bytes
1425 bytes
There is a way to upgrade with the following additional material/labor: Miniscribe model 8025<not sure>, a HD ribbon cable, fan and a power connector. One of the floppy drives is to be replaced with the HD<a specia <a special bracket is installed under the HD and the fan is installed beside the HD, the power connector is installed to the HD and fan. 2 junpers are moved (1) to tell the computer it has 1 floppy drive and another to tell it is now has a HD installed....That's all. I have done it. Drawback to installing a HD for the EZ-PC is the cost. It is cheaper to purchase a EZ-PC with HD than purchase a HD, bracket, power connector and fan...... -- internet: rocco@nstar.rn.com -or- rocco%nstar@iuvax.cs.indiana.edu uucp: ..!uunet!nstar.rn.com!rocco -or- ..!uunet!nstar!rocco NSTAR Public Access 219-289-0287 - 1190 newsgroups - 1500 megabytes - 7 lines
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads