🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.zenith
3 messages
3 total messages Started by henry Tue, 12 Feb 1991 03:55
ESDI vs AT bus ethernet card for Z-386
#517
Author: henry
Date: Tue, 12 Feb 1991 03:55
8 lines
633 bytes
I have a Z386/20 that I want to put on an ethernet network.  Since it
has both ESDI and AT slots, I was wondering:

  1)  Does anyone make ethernet cards for ESDI
  2)  Is it worth the extra money

Thanks,
-Henry Bland
Re: ESDI vs AT bus ethernet card for Z-386
#518
Author: Dick O'Connor
Date: Tue, 12 Feb 1991 16:36
7 lines
935 bytes
You mean EISA (extended industry standard architecture bus), not ESDI
(a hard disk interface spec).  At this point in time, I haven't seen
any supported claims of better network throughput using EISA cards.
The standard 8-bit and 16-bit network cards we use seem plenty fast
enough over 10 mbit Ethernet.  But my only experience is with small
(up to 20) machine local area networks.  If your network is enterprise-wide
or international, it's a whole new can of worms.
Re: ESDI vs AT bus ethernet card for Z-386
#519
Author: Russ Nelson
Date: Wed, 13 Feb 1991 07:48
20 lines
1497 bytes
In article <1991Feb11.215514.1768@yogi.fhhosp.ab.ca> henry@yogi.fhhosp.ab.ca writes:

   I have a Z386/20 that I want to put on an ethernet network.  Since it
   has both EISA and AT slots, I was wondering:

     1)  Does anyone make ethernet cards for EISA

Yes, MYLEX does.  I know nothing more about them than their existance.

     2)  Is it worth the extra money

Hard to say.  A good bit of your speed is lost transferring the packets
from the board's memory to the system memory.  So, if the board really
is a 32-bit board, AND your packet transfers are aligned on 32-bit
boundaries, you should see some speed increase.

--
--russ <nelson@clutx.clarkson.edu> I'm proud to be a humble Quaker.
It's better to get mugged than to live a life of fear -- Freeman Dyson
I joined the League for Programming Freedom, and I hope you'll join too.
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads