Thread View: comp.sys.zenith
1 messages
1 total messages
Started by Ted Goldstein
Mon, 01 Apr 1991 18:50
Re: Upgrading Memory in Z-248
Author: Ted Goldstein
Date: Mon, 01 Apr 1991 18:50
Date: Mon, 01 Apr 1991 18:50
27 lines
2048 bytes
2048 bytes
>I am trying to upgrade the memory in my Z-248-12 (model ZBF-2526-EK) >Is there an undocumented jumper or sitch somewhere to tell the system what >kind of SIMMS are installed? Any other suggestions? My attempts to >talk to Zenith technical support have failed for the last 3 days. I finnaly got through to Zenith Tech Support and got my answer, so I thought I would share it for other 248 owners. Apparantly the 248 motherboard has a jumper which tells it if there are 1 Meg or 256K SIMMS in the first 4 SIMM slots. On my mother board the jumper is J103, but the Tech first told me J102 which apparantly was the number on a earlier revision of the motherboard. Since my board had no J102, I would suggest that if you have a J102, try it first, and if not then use J103. For J102: positions 1-2 mean 1 Meg SIMMS but for J103: positions 2-3 mean 1 MEG SIMMS. I hope this information proves usefull to someone else out there, it sure would be nice if it were in the manual that came with the PC. ------------------------------------------------------------------------------- |Ted Goldstein | E-mail: du4@mace.cc.purdue.edu | |Network and Systems Admninistrator | Phone : (317) 494-9070 | |Purdue University School of Technology | Office: Knoy Hall, Rm G009 | |-----------------------------------------------------------------------------| |Philosophy's alright, when you have a house to think about it in-Arlo Guthrie| -------------------------------------------------------------------------------
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads