Disabling Floppy Drive Contr. in Z-151

Thread View: comp.sys.zenith

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by William T. Dedula Mon, 06 May 1991 15:41

#616

Author: William T. Dedula
Date: Mon, 06 May 1991 15:41

26 lines
1622 bytes

Hello All;
I'd like to know if it is possible to disable the Floppy 
Drive Controller card which came with the Z-151 ? And if so, 
How would I go about doing it ??? 

I recently bought a 3.5" drive controller card and am now 
running all drives off that although as a result of the original
floppy controller still enabled, the drive designations are 
messed up. The 5-1/4" is Drive A, the 3-1/2" is drive "C", and 
the 20 MB Hard Disk is Drive "D". We would perfer to have
the 5-1/4", Drive "A", the 3-1/2", Drive "B", and the 20MB 
Hard Disk, Drive "C", and NO drive "D". Any ideas ??? 

Thank you VERY Much !!!

Tim

W. Tim Dedula                        Internet: 
N.A.S.A. Lewis Research Center       tdedula@nasamail.nasa.gov
Mail Stop 77-3                       tidedu@mars.lerc.nasa.gov
21000 BrookPark Road                 aa252@cleveland.freenet.edu
Cleveland, Ohio 44135
Phone (216) 433-3668

The National Aeronautics and Space Administration: Science and
Technology ... for the Benefit of ALL Mankind !!!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads