🚀 go-pugleaf

I need to get a termcap for a Seiko 3620.  These terminals were attached to
a Seiko 8610 multi-user C/PM box.  I would like to recieve email from
anyone who may consider themselves an expert concerning information about
Seiko 3620.  Esp. annoying is the escape sequence:

ESC [ Ps1 ; Ps2 G

...which selects a tone, either 0 for 600hz, or 1 for 1200hz, for a binary
value( up to 16384) in increments on 26.6666ms, such that:

CTRL G == ESC[1;10G

...which is a 1200hz tone for 267ms.  The problem is that I would like to
write a morse code tutor that would work over phone lines with this
terminal.  To do that I would have to be able to specify a unit of silence
for a duration of 26.6666ms as well.

Any wizards out there?

P.S.  This terminal expects 12 volts on the rs232c port, but most modems
use 5 volts now.  What should I do?  Pull teeth on the serial cable?  Which
teeth?
-- 
cheselka@cactus.org               N5UVV              Michael R. M. Cheselka
os9@gnu.ai.mit.edu        Hangs out on 145.21mhz       400 W. 34th st. #103
membership@cactus.org                                 Austin, TX 78705-1331
{...}!cs.utexas!cactus.org!cheselka (512)452-9412v ( 24hours answer. mach.)