HP 700/22 terminal and RTS/CTS

Article View: comp.terminals

Article #1488

#1488

From: Brian C Hill
Date: Fri, 06 Oct 1995 03:05

14 lines
1206 bytes

	Is it possible to turn on hardware flow control on hp 700/22?
I see a field that can be toggled between 'data leads' and 'modem
control'. Is that it? I am using a Hayes Optima 144 with it. I cannot
seem to get it to work. If I select modem control on the terminal and
rts/cts setting on the modem, the connection between the terminal and
modem always falls back to 1200 even though the connection to the
remote site connects at 14400. What is going on? Is it possible to do
hardware flow control with this combo or not?


   ____________________________________________________________________
  /  Brian C. Hill                    bchill@ucdavis.edu   __          \
  |  Systems Programmer               (916) 739-8868       \/          |
  |  Sierra Nevada Ecosystem Project  University of California, Davis  |

Technical Details

Message-ID: <4526db$1ll@mark.ucdavis.edu>

Path: arc1-ca.pugleaf.net!news.ucdavis.edu!pandora!cccbrian

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!news.ucdavis.edu!pandora!cccbrian
From: cccbrian@pandora.ucdavis.edu (Brian C Hill)
Newsgroups: comp.terminals,comp.dcom.modems
Subject: HP 700/22 terminal and RTS/CTS
Date: 6 Oct 1995 03:05:15 GMT
Organization: University of California, Davis
Message-ID: <4526db$1ll@mark.ucdavis.edu>
NNTP-Posting-Host: pandora.ucdavis.edu
X-Newsreader: TIN [version 1.2 PL2]