Attach a Blit 5620 to a Bridge Comm Server

Article View: comp.terminals

Article #1542

#1542

From: Dan Ehrlich
Date: Tue, 25 Nov 1986 15:11

13 lines
1252 bytes

We recently acquired a Bridge CS/100 communications server running TCP/IP and are
having difficulty connecting AT&T 5620 (blit5) terminals.  If one sets the 5620
to not generate flow control info the when loadblit is called from windows the
terminal will hang after loading only a few packets.  If anyone has had any
experience using the 5620 via a Bridge cs/100 I would appreciate hearing from
them.  Thanks in advance.


--Daniel Ehrlich
CSNET:	  ehrlich@penn-state.csnet	USPS: The Pennsylvania State University
INTERNET: ehrlich@psuvax1.psu.edu	      Department of Computer Science
UUCP: 	  ...!ihnp4!psuvax1!ehrlich	      333 Whitmore Laboratory
BITNET:	  ehrlich@psuvax1.bitnet	      University Park, PA   16802

Technical Details

Message-ID: <2345@psuvax1.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!husc6!panda!genrad!decvax!decwrl!hplabs!sdcrdcf!burdvax!psuvax1!ehrlich

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!husc6!panda!genrad!decvax!decwrl!hplabs!sdcrdcf!burdvax!psuvax1!ehrlich
From: ehrlich@psuvax1.UUCP (Dan Ehrlich)
Newsgroups: comp.terminals
Subject: Attach a Blit 5620 to a Bridge Comm Server
Message-ID: <2345@psuvax1.UUCP>
Date: Tue, 25-Nov-86 10:11:01 EST
Article-I.D.: psuvax1.2345
Posted: Tue Nov 25 10:11:01 1986
Date-Received: Thu, 4-Dec-86 06:06:08 EST
Distribution: net
Organization: Pennsylvania State Univ.
Lines: 13