Re: Termcap entry for blit ( dmd 5620 )

Article View: comp.terminals

Article #1596

#1596

From: Doug Gwyn
Date: Tue, 13 Jan 1987 22:28

8 lines
1097 bytes

Assuming you're still having trouble with flow control
after you've set up the modes on your 5620 as specified
in the comments at the beginning of the termcap I posted,
your problem is very likely that you have an older model
5620 and have not supplied all the correct handshaking
signals on its RS-232-C host connector.  For reasons
unknown to me, flow control doesn't work right under
those circumstances (no, it doesn't make any sense!).

Technical Details

Message-ID: <5515@brl-smoke.ARPA>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!ut-sally!husc6!rutgers!brl-adm!brl-smoke!gwyn

References: <923@uw-nsr.UUCP> <604@briar.UUCP> <5498@brl-smoke.ARPA> <622@briar.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!ut-sally!husc6!rutgers!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.ARPA (Doug Gwyn )
Newsgroups: comp.terminals
Subject: Re: Termcap entry for blit ( dmd 5620 )
Message-ID: <5515@brl-smoke.ARPA>
Date: Tue, 13-Jan-87 17:28:17 EST
Article-I.D.: brl-smok.5515
Posted: Tue Jan 13 17:28:17 1987
Date-Received: Sat, 17-Jan-87 00:52:02 EST
References: <923@uw-nsr.UUCP> <604@briar.UUCP> <5498@brl-smoke.ARPA> <622@briar.UUCP>
Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) <gwyn>)
Distribution: na
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 8

Reply to Parent Message