Re: adm3a control `g` problem

Article View: comp.terminals

Article #1675

#1675

From: Doug Gwyn
Date: Mon, 04 May 1987 20:52

10 lines
1139 bytes

In article <344@dasys1.UUCP> mjablow@dasys1.UUCP (Mark Jablow) writes:
>I recently purchased a lear siegler adm3a terminal and I 
>have been having trouble with it.  Whenever the terminal receives a 
>control`g`, it begins scrolling the text on the screen in reverse and, 
>when it does this, garbled text from the screen is sent from the terminal.

You're triggering the RAM-dump feature.  You need to be sure your
RS-232-C connector does not supply a signal to one of the pins
that controls this (I forget which pin; it's in the technical
manual).

Technical Details

Message-ID: <5830@brl-smoke.ARPA>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!mimsy!eneevax!umd5!brl-adm!brl-smoke!gwyn

References: <344@dasys1.UUCP>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!mimsy!eneevax!umd5!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.ARPA (Doug Gwyn )
Newsgroups: comp.terminals
Subject: Re: adm3a control `g` problem
Message-ID: <5830@brl-smoke.ARPA>
Date: Mon, 4-May-87 16:52:47 EDT
Article-I.D.: brl-smok.5830
Posted: Mon May  4 16:52:47 1987
Date-Received: Tue, 5-May-87 05:35:51 EDT
References: <344@dasys1.UUCP>
Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) <gwyn>)
Distribution: comp
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 10

Reply to Parent Message