more cit-101

Article View: comp.terminals

Article #1691

#1691

From: Anthony A. Datri
Date: Mon, 01 Jun 1987 00:36

8 lines
895 bytes

Okay, I've got a cit-101 manual here, but it seems real vague about things.
Does the presence of a printer connector on the back imply that it actually
has a working printer port?  I pulled out the board, and there don't seem to
be any gaping holes where another uart would go.  The only free spots are 
several for chips of around 14 pins.

TI sure made a strange port on their omni 800 printers...

Technical Details

Message-ID: <8706010038.AA06410@ucbvax.Berkeley.EDU>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!husc6!think!ames!sdcsvax!ucbvax!ANDREW.CMU.EDU!aad#

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!husc6!think!ames!sdcsvax!ucbvax!ANDREW.CMU.EDU!aad#
From: aad#@ANDREW.CMU.EDU (Anthony A. Datri)
Newsgroups: comp.terminals
Subject: more cit-101
Message-ID: <8706010038.AA06410@ucbvax.Berkeley.EDU>
Date: Sun, 31-May-87 20:36:31 EDT
Article-I.D.: ucbvax.8706010038.AA06410
Posted: Sun May 31 20:36:31 1987
Date-Received: Tue, 2-Jun-87 03:08:40 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 8