🚀 go-pugleaf

From article <2335@pur-phy>, by dds@pur-phy (Dennis D. Sallee):
> 
> HARDWARE PROBLEMS WITH WYSE 60 TERMINAL:
> 
> Every device made by humans has certain idiosyncracies, and these seem to be
> the most common of the Wyse 60.  If you still have problems, and wish to 

We have over 100 Wyse-85 terminals.  We are diligently avoiding purchasing
a maintenance contract with Avnet, but they are getting more attractive by 
the day.  These tubes are all "about" 2 years old, and in the last three
weeks we have sent 13 tubes in for service - replacement of the logic board
AND LOGIC POWER SUPPLY.  The failure modes are simple: Either the flyback 
transformer shrieks (I can't hear it but many can) or the video just goes
away.  Some slowly, some suddenly.  'Tanyrate, Avnet's flat rate is $125,
and is "cheaper" than their contract.  We can get 1 day turnaround from our 
local office (in Omaha).

My own observation is that the Wyse people don't spec their power supplies 
very well.  For ANY of their equipment. We are OEMing WYSE386 PC's, and
more than one has fried one part or another, including the PS itself, and
the oldest machine we have is ~6 months old.

We do have dirty power, but I have dirty power at home too, and have never 
had any power supply problems from the Heathkit machine I am working on 
at this moment.  

Just had to add my $0.06 worth.
Marc


-- 
Na khuya mne podpis'?                 |  Internet: cs057@zeus.unl.edu      
                                      |  UUCP:     uunet!btni!unocss!mlewis
Go for it!                            |  Bitnet:   CS057@UNOMA1            
---------------------------------------------------------------------------