Re: more cit-101

Article View: comp.terminals

Article #1711

#1711

From: kuo
Date: Sun, 07 Jun 1987 21:33

22 lines
1649 bytes

In article <AUkStGy00WABwZI0Bj@andrew.cmu.edu>, aad+@andrew.cmu.edu (Anthony A. Datri) writes:
> Moreover, the manual says that I'll get a D screen for setup with the port
> there, but i only get a, b, and c

I think that implies you don't have a printer port installed. I use to use a
CIT-101 with their graphics card (that emulates TEK4010). It is highly possible
that the connector is there but not the actual hardware (ie chips etc). In my
personal opinion, the CIT-101 was not very reliable; it died on me too many
times, even right after coming back from repairs!

... Peter/
-------------------------------------------------------------------------------
Peter Kuo                   | Bitnet (VMS)  : KUO@SASK
Accelerator Laboratory      |
(a.k.a. The Beam Warehouse) | uucp   (Unix) : !alberta\
Univ. of Saskatchewan       |                 !ihnp4  -- !sask!skatter!kuo
Saskatoon, Saskatchewan     |                 !utcsri /
CANADA  S7N 0W0             |
(Earth)                     | Ma Bell       : (306) 966-6059

Disclaimer: I don't know what I am saying, so don't quote me on
	    anything! And I only speak for myself.

Technical Details

Message-ID: <322@skatter.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!alberta!sask!skatter!kuo

References: <AUkStGy00WABwZI0Bj@andrew.cmu.edu>

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!cbosgd!ihnp4!alberta!sask!skatter!kuo
From: kuo@skatter.UUCP
Newsgroups: comp.terminals
Subject: Re: more cit-101
Message-ID: <322@skatter.UUCP>
Date: Sun, 7-Jun-87 17:33:30 EDT
Article-I.D.: skatter.322
Posted: Sun Jun  7 17:33:30 1987
Date-Received: Wed, 10-Jun-87 07:16:05 EDT
References: <AUkStGy00WABwZI0Bj@andrew.cmu.edu>
Organization: Accelerator Lab, Saskatoon, Sask.
Lines: 22

Reply to Parent Message