Wyse control sequences

Article View: comp.terminals

Article #1782

#1782

From: Gordon R. Thompson
Date: Fri, 04 Sep 1987 20:58

14 lines
1369 bytes

I am looking  for the ASCII  control  sequence  necessary to read and set the 
programmable keys for WYSE terminals. The little documentation I have defines
the sequence in terms of WYSE  defined  mnemonics,  but does not define them.

I intend to write a  program,  to take a file of programmable key definitions 
and to initialize the  connected WYSE terminal according to that file. It may
be that some one out there already has one such program, that I could use. If
not, I intend to post my program to comp.sources when completed.

Gordon Thompson: Thank you for your support.  | EMAIL: gatech!dcatla!sunc!dngrt
D. Digital       #include "std_disclaim.h"    | Phone: 404-442-4827
C. Communications                             | Addr: c/o DCA, 1000 Alderman
A. Associates                                 |    Drive, Alpharetta, Ga. 30201

Technical Details

Message-ID: <1063@dcatla.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!dcatla!dngrt

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!bloom-beacon!gatech!dcatla!dngrt
From: dngrt@dcatla.UUCP (Gordon R. Thompson)
Newsgroups: comp.terminals
Subject: Wyse control sequences
Message-ID: <1063@dcatla.UUCP>
Date: Fri, 4-Sep-87 16:58:37 EDT
Article-I.D.: dcatla.1063
Posted: Fri Sep  4 16:58:37 1987
Date-Received: Sat, 5-Sep-87 19:47:29 EDT
Distribution: na
Organization: DCA, Inc., Alpharetta, GA
Lines: 14
Keywords: Programmable Key Initialization