🚀 go-pugleaf

In article <16937@gatech.edu> ken@gatech.edu (Ken Seefried iii) writes:
>I just inherited a Tek 4025 graphics terminal and the associated IEEE488
>plotter...

The Tektronix 4025 is undoubtedly one of the most poorly-designed
terminals of all time.  What happens on its display is dependent
on what you're doing on the keyboard!  This makes effective full-
duplex use virtually impossible.

>1)  Dose anyone have a termcap for one of these?

#
# Tektronix 4025A
# The following status modes are assumed for normal operation (replace the
# initial "!" by whatever the current command character is):
#	!COM 29			# NOTE: changes command character to GS (^])
#	^]DUP
#	^]ECH R
#	^]EOL
#	^]RSS T
#	^]SNO N
#	^]STO 9 17 25 33 41 49 57 65 73
# Other modes may be set according to communication requirements.
# If the command character is inadvertently changed, termcap can't restore it.
# Insert-character cannot be made to work on both top and bottom rows.
# Clear-to-end-of-display emulation via !DLI 988 is too groady to use, alas.
# There also seems to be a problem with vertical motion, perhaps involving
# delete/insert-line, following a typed carriage return.  This terminal sucks.
# No delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
X5|tek4025a|Tektronix 4025A:\
	:al=^K^]ili;:am:bl=^G:bt=^]bac;:bw:CC=^]:cl=^]era;^J^]rup;:co#80:\
	:cr=^M:ct=^]sto;:da:db:DC=^]dch %d;:dc=^]dch;:DL=^]dli %d;:dl=^]dli;:\
	:DO=^]dow %d;:do=^J:it#8:LE=^]lef %d;:le=^H:li#34:nd=^]rig;:\
	:RI=^]rig %d;:\
	:rs=!com 29^]del 0^]rss t^]buf^]buf n^]cle^]dis^]dup^]ech r^]eol\
^]era g^]for n^]pad 203^]pad 209^]sno n^]sto 9 17 25 33 41 49 57 65 73\
^]wor 0;:\
	:SF=^]dow %d;:sf=^J:ta=^I:UP=^]up %d;:up=^K:xo:\
	:ce=^]dch 80;:ch=\r^]rig %d;:\
	:bs:pt:xx: