Article View: comp.terminals
Article #1894re: WYSE 60 terminal
From: Bryan Ewbank
Date: Mon, 11 Jan 1988 13:50
Date: Mon, 11 Jan 1988 13:50
18 lines
1268 bytes
1268 bytes
This is a followup to a prvious article. I was asking for help with the
WYSE 60 terminal, and its annoying habit of using the alternate character
set interleaved with the "normal ascii" character set....
...As it turns out, the problem was that I has the terminal set for 8 data
bits and 1 stop bit. Changing this to 7 data bits and 2 stop bits seems to
have bypassed the problem admirably. Alternately, using the terminal in its
WY 50+ personality is an acceptable solution also.
One person suggested that changing the parity appeared to have no effect...
...he was correct, because the parity affects *outgoing* data only, and the
problem that he and I were experiencing was with *incoming* data.
Well, good day to all,
--
Bryan Ewbank UUCP: ..{ihnp4,moss,cbosgd}!ihlpg!bdewbank
AT&T Bell Labs VOICE: 312/979-5146
Naperville, IL ZIP: 60566
Technical Details
Message-ID:
<4599@ihlpg.ATT.COM>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!bingvaxu!leah!uwmcsd1!ig!jade!ucbvax!cbosgd!ihnp4!ihlpg!bdewbankShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!hao!boulder!sunybcs!bingvaxu!leah!uwmcsd1!ig!jade!ucbvax!cbosgd!ihnp4!ihlpg!bdewbank From: bdewbank@ihlpg.ATT.COM (Bryan Ewbank) Newsgroups: comp.terminals Subject: re: WYSE 60 terminal Message-ID: <4599@ihlpg.ATT.COM> Date: 11 Jan 88 13:50:57 GMT Distribution: na Organization: AT&T Bell Laboratories - Naperville, Illinois Lines: 18 Keywords: parity