Re: Info about the AT&T 620 terminal

Article View: comp.terminals

Article #2054

#2054

From: Doug Gwyn
Date: Mon, 27 Jun 1988 03:50

8 lines
1027 bytes

In article <733@vsi.UUCP> friedl@vsi.UUCP (Stephen J. Friedl) writes:
>Interactive work in layers on the 615 is so sluggish that we use a pair
>of terminals rather than run layers -- it's that bad.

There must be some system problem; layers protocol throughput should be
close to the nominal connection baud rate on a 3B2/400.  It sounds like
you're getting 1-character packets rather than umpteen-character packets.
That is fixable; nag your AT&T support service.

Technical Details

Message-ID: <8170@brl-smoke.ARPA>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!nrl-cmf!cmcl2!brl-adm!brl-smoke!gwyn

References: <727@vsi.UUCP> <28765@pyramid.pyramid.com> <8161@brl-smoke.ARPA> <733@vsi.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!nrl-cmf!cmcl2!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.ARPA (Doug Gwyn )
Newsgroups: comp.terminals,comp.sys.att
Subject: Re: Info about the AT&T 620 terminal
Message-ID: <8170@brl-smoke.ARPA>
Date: 27 Jun 88 03:50:14 GMT
References: <727@vsi.UUCP> <28765@pyramid.pyramid.com> <8161@brl-smoke.ARPA> <733@vsi.UUCP>
Reply-To: gwyn@brl.arpa (Doug Gwyn (VLD/VMB) <gwyn>)
Distribution: comp
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 8
t: 2154

Reply to Parent Message