Need dip switch settings for a Televideo 920C

Article View: comp.terminals

Article #2149

#2149

From: Dan Smith
Date: Mon, 12 Sep 1988 03:06

20 lines
1078 bytes

	Hello, a friend of mine has a TV920C, there are two
	main dip switches, and we don't have a manual for it.
	S1 is for the baud rate switch, numbered 1-10, and
	S2 is apparently for everything else, numbered 1-10.

	Does someone out there have the settings for 1200 or 2400 baud?

	Thanks much in advance,

			dan

p.s. please respond through a path other than uunet, some of our mail has
been bouncing...

-- 
DanSmith IslandGraphics 4000CivicCenterDr SanRafael MarinCo CA 94903 4154911000
daniel@island.uu.net {ucbvax!ucbcad,sun,well,unicom,mcvax!uunet}!island!daniel
415 332 FAST(h)|d: Nobodys' fault but mine| good natured infonaut, hoopy frood
           George Bush: Armchair Historian, yes, president, no :-)

Technical Details

Message-ID: <355@island.uu.net>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!island!daniel

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!island!daniel
From: daniel@island.uu.net (Dan Smith)
Newsgroups: comp.terminals
Subject: Need dip switch settings for a Televideo 920C
Message-ID: <355@island.uu.net>
Date: 12 Sep 88 03:06:02 GMT
Reply-To: daniel@island.uu.net (Dan Smith)
Organization: Island Graphics, Marin County, California
Lines: 20