Re: Link MC-10 terminals

Article View: comp.terminals

Article #2577

#2577

From: Bill Campbell
Date: Sun, 04 Mar 1990 23:32

22 lines
1393 bytes

In article <342@comcon.UUCP> tim@comcon.UUCP (Tim Brown) writes:
>
>I am using an MC5 with ISC202, at 38400.  No problems.  I am running this
>
>I have a question tho, has any one got the parallel port to work?  We
>have had no luck at all.  
>
The MC-5 had a bug introduced in the firmware, I believe at release 2.03
that caused the printer output to be fired back down the regular serial
port rather than to the parallel printer port when in vt220 emulations.
It would print OK in wyse60.

The best bet is to get firmware updates from Link (current version is
2.05 or 2.06 may be out to the public now).

To chech your firmware press ctrl and shift simultaneously and it will
appear on the status line.
-- 
....microsoft--\					Bill Campbell; Celestial Software
...uw-beaver-----!thebes!camco!bill	6641 East Mercer Way
....fluke------/					Mercer Island, Wa 98040
....hplsla----/						(206) 232-4164

Technical Details

Message-ID: <3217@thebes.Thalatta.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!uw-entropy!thebes!campbell

References: <1990Feb26.231711.9073@edm.uucp-> <508@bilver.UUCP> <342@comcon.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!uw-entropy!thebes!campbell
From: campbell@Thalatta.COM (Bill Campbell)
Newsgroups: comp.terminals
Subject: Re: Link MC-10 terminals
Message-ID: <3217@thebes.Thalatta.COM>
Date: 4 Mar 90 23:32:31 GMT
References: <1990Feb26.231711.9073@edm.uucp-> <508@bilver.UUCP> <342@comcon.UUCP>
Reply-To: campbell@Thalatta.COM (Bill Campbell)
Organization: Thalatta Corporation, Bellevue WA
Lines: 22

Reply to Parent Message