Link MC6 queries

Article View: comp.terminals

Article #36

#36

From: Michael T. Davis
Date: Tue, 03 Nov 1992 13:32

16 lines
1249 bytes

	Has anyone had any luck using the Tektronix 4010/4014 emulation mode
of the Link MC6 terminal?  Whenever I try to use it, either from Setup mode,
or by sending the escape sequence to enter it, the terminal loses all I/O and
the only thing I can do is move the graphics cursor around the screen with
the cursor control keys.  The only way out of this mode is to cycle the power
on the terminal.  If anyone can offer any information, I'd appreciate it.  In
normal operation, I'm using the terminal in VT220-7 mode.  I have an ANSI
keyboard (which has the same key layout as a DEC LK201).

							Thanks,
							 Mike
--
 Internet: davism@KCGL1.eng.ohio-state.edu |
            -or- DAVISM+@osu.edu           |   These Thoughts, They Be Mine
   BITNET: DAVISM+@OHSTMAIL.BITNET         |

Technical Details

Message-ID: <1992Nov3.133248.1290@magnus.acs.ohio-state.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!magnus.acs.ohio-state.edu!kcgl1.eng.ohio-state.edu!DAVISM

Show Full Headers

Complete Article Headers

Newsgroups: comp.terminals
Path: arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!magnus.acs.ohio-state.edu!kcgl1.eng.ohio-state.edu!DAVISM
From: DAVISM@kcgl1.eng.ohio-state.edu (Michael T. Davis)
Subject: Link MC6 queries
Message-ID: <1992Nov3.133248.1290@magnus.acs.ohio-state.edu>
Sender: news@magnus.acs.ohio-state.edu
Nntp-Posting-Host: kcgl1.eng.ohio-state.edu
Organization: The Ohio State University
Date: Tue, 3 Nov 1992 13:32:48 GMT
Lines: 16