QVT-102

Thread View: comp.terminals

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Clarke Anderson Wed, 12 Aug 1992 19:44

#168

Author: Clarke Anderson
Date: Wed, 12 Aug 1992 19:44

9 lines
740 bytes

Help! I have recently acquired a Qume QVT-102 terminal. I assume it's 
(somewhat) VT-102 compatable, but there's no manual for it. I'm going 
to be using it with my modem (as soon as I can find it). Anyway, I can't 
work out how to save the setup - pushing "setup" gives you the manu 
of all the options, but there's not a save option.

Anyone have any ideas? Answers in mail would be appreciated, if possible.

Ta in advance...

Re: QVT-102

#523

Author: phys169
Date: Wed, 12 Aug 1992 22:43

22 lines
1458 bytes

In article <71046.2249221347@kcbbs.gen.nz>, Voodoo@kcbbs.gen.nz (Clarke Anderson) writes:
> Help! I have recently acquired a Qume QVT-102 terminal. I assume it's 
> (somewhat) VT-102 compatable, but there's no manual for it. 

No, it isn't VT-compatible, rather TVI910/ADM5/ADDS/Hazeltine compatible. The
QVT103 is the VT-compatible one in the QVT100x range.  In QVT102(A) mode it is
moderately compatible with TVI925's, WY50's and that generation - if you're 
looking for TERMCAP entries it would be a shame to limit it to oldies like
ADM5's.

>... I can't 
> work out how to save the setup - pushing "setup" gives you the manu 
> of all the options, but there's not a save option.
> 
The QVT102 and QVT102A differ in the way you get into setup (The QVT102A
requires you press Ctrl/Shift/Setup together).  The Shift-S saves the setup
into NVRAM and Shift-D returns all status lines to factory defaults. Shift-R
recalls the previous saved values.

I have the Operator Manual in front of me, if you need more info.

Mark Aitchison, University of Canterbury, New Zealand.

QVT-101

#533

Author: Tarmo Rohtla
Date: Wed, 19 Aug 1992 02:35

17 lines
1105 bytes

The recent question about Qume QVT-102's has prompted me to post this.

Recently we acquired a number of second-hand Qume QVT-101 terminals. 
Does anyone have a termcap entry for this ? I would greatly appreciate a 
copy if you do. I have no documentation on the Qumes.

Thanks in advance,

Tarmo.



-- 
Tarmo Rohtla                            | email:tarmo@eleceng.adelaide.edu.au
Departmental Engineer/Computer Manager  | phone: (+61 8) 228 4706
Electrical and Electronic Engineering   | fax  : (+61 8) 224 0464
University of Adelaide                  |GPO Box 498,Adelaide SA 5001,Australia

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads