ADM-3 DUMB TERMINAL

Thread View: comp.terminals

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Sam Latonia Tue, 18 Aug 1992 17:08

#532

Author: Sam Latonia
Date: Tue, 18 Aug 1992 17:08

17 lines
1425 bytes

I have a ADM-3 dumb terminal and am starting to have a problem
with the monitor on  it. It is from time to time trying to
colaps from side to side. As if it was a vertical problem. Once
in a while after 10 or 20 mins. of the monitor jurking from
both left and right sides about a 1/4" to the center it went all
the way leaving a vertical line up the center of the screen
After 5 min. of being turned off it came back okay. I think this
must be a vertical chip on the monitor board but don't have and
info on the ADM-3 at all. Can some one that might know about these
ADM-3 terminals tell me what chip or cap or rerister that I might
check into to correct this problem......Thanks you
-- 
"HELP" I've fallen and I can't reach the keyboard!
**************************************************
         THE FIRESIDE BBS 884-9728
WHERE THE PARTICULAR PEOPLE COMMUNICATE!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads