🚀 go-pugleaf

>   ... The
>   810 has a thumbwheel switch that must be set to "3" for LocalTalk and
>   to some other number for the RS-232 port. Is changing the switch position
>   sufficient to disconnect the printer from LocalTalk and connect it to
>   RS-232 or must I also remove the LocalTalk cable from the printer?

The manual implies that when you are physically connected to AppleTalk
(I assume "LocalTalk" is synonymous), the switch must stay set to 3 at
all times.  "A mistake in the switch setting could bring down the entire
network", it says.

				Henry Spencer @ U of Toronto Zoology
				{ihnp4,decvax,uunet!mnetor}!utzoo!henry


----------------------------------------
Submissions to: desktop@plaid.sun.com
Administrivia to: desktop-request@plaid.sun.com
UUCP: {amdahl,decwrl,hplabs,ihnp4}!sun!plaid!desktop{-request}
Archives can be gotten from the archive-server.
To get information on the archive-server, send mail to:
archive-server@plaid.sun.com -or- sun!plaid!archive-server
with a subject line of help