🚀 go-pugleaf

Hi,

I've been trying to get musictex to work and I seem to be having
troubles finding the fonts I need, getting them to work, and so on.
I've copied not only the *.mf fonts from ymir.claremont.edu and all
the *.tfm fonts.  When inputting musictex.tex to tex, it couldn't find
any music fonts so I changed the .mf suffixes to .tfm to see what
would happen and I got the log file I'm including at the end of
letter.  Could someone either help me or suggest where I could find
the answers?

Thanks,
Richard.

This is TeX, C Version 3.0 (format=plain 91.3.28)  9 AUG 1992 04:26
**&tex

*\input musictex
(/tmp/ryanr/music/package/demos/musictex.tex
! Undefined control sequence.
l.14 \font\eightrm=\fonthdg
                            mr8
? ?
Type <return> to proceed, S to scroll future error messages,
R to run without stopping, Q to run quietly,
I to insert something, E to edit your file,
1 or ... or 9 to ignore the next 1 to 9 tokens of input,
H for help, X to quit.
? s
OK, entering \scrollmode...
! Font \eightrm=mr8 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \font 
l.15 \font
          \tentt=\fonthdg mtt10
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.15 \font\tentt=\fonthdg
                          mtt10
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \tentt=mtt10 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \font 
l.17 \font
          \eighti=\fonthdg mmi8 \skewchar\eighti='177
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.17 \font\eighti=\fonthdg
                           mmi8 \skewchar\eighti='177
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \eighti=mmi8 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \skewchar 
l.17 \font\eighti=\fonthdg mmi8 \skewchar
                                         \eighti='177
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.19 \font\eightsy=\fonthdg
                            msy8 \skewchar\eightsy='60
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \eightsy=msy8 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \skewchar 
l.19 \font\eightsy=\fonthdg msy8 \skewchar
                                          \eightsy='60
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.21 \font\eightbf=\fonthdg
                            mbx8
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \eightbf=mbx8 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \font 
l.23 \font
          \eightsl=\fonthdg msl8
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.23 \font\eightsl=\fonthdg
                            msl8
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \eightsl=msl8 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \font 
l.24 \font
          \eightit=\fonthdg mti8
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.24 \font\eightit=\fonthdg
                            mti8
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \eightit=mti8 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \font 
l.25 \font
          \ppff=\fonthdg mbxti10 scaled \magstep 1
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.25 \font\ppff=\fonthdg
                         mbxti10 scaled \magstep 1
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \ppff=mbxti10 scaled 1200 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \relax 
l.25 \font\ppff=\fonthdg mbxti10 scaled \magstep 1
                                                  
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

\footmarkcount=\count26
! Undefined control sequence.
l.148 \font\enorme=\fonthdg
                            mbx10 scaled \magstep5
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \enorme=mbx10 scaled 2488 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \relax 
l.148 \font\enorme=\fonthdg mbx10 scaled \magstep5
                                                  
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

! Undefined control sequence.
l.149 \font\moyen=\fonthdg
                           mbx10 scaled \magstep2
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Font \moyen=mbx10 scaled 1440 not loadable: Metric (TFM) file not found.
<to be read again> 
                   \relax 
l.149 \font\moyen=\fonthdg mbx10 scaled \magstep2
                                                 
I wasn't able to read the size data for this font,
so I will ignore the font specification.
[Wizards can fix TFM files using TFtoPL/PLtoTF.]
You might try inserting a different font spec;
e.g., type `I\font<same font id>=<substitute font name>'.

\brace@w=\dimen16
\pt@up=\dimen17
\noteskip=\dimen18
\elemskip=\dimen19
\q@antum=\dimen20
\n@raise=\dimen21
\n@width=\dimen22
\stem@skip=\dimen23
\interligne=\dimen24
\nullthick=\dimen25
\bottommargin=\dimen26
\topmargin=\dimen27
\total@margin=\dimen28
\internote=\dimen29
\interbeam=\dimen30
\Interligne=\dimen31
\interportee=\dimen32
\pagewidth=\dimen33
\systemheight=\dimen34
\k@ii=\dimen35
\k@iii=\dimen36
\k@iiii=\dimen37
\k@iiv=\dimen38
\k@iv=\dimen39
\k@ivi=\dimen40
\altplancher=\dimen41
\altportee=\dimen42
\systemheight=\dimen43
\linewidth=\dimen44
\x@skip=\dimen45
\locx@skip=\dimen46
\st@bot=\dimen47
\st@top=\dimen48
\t@xi=\dimen49
\t@zi=\dimen50
\t@xii=\dimen51
\t@zii=\dimen52
\t@xiii=\dimen53
\t@ziii=\dimen54
\t@xiv=\dimen55
\t@ziv=\dimen56
\t@xv=\dimen57
\t@zv=\dimen58
\t@xvi=\dimen59
\t@zvi=\dimen60
\t@pi=\count27
\t@si=\count28
\t@pii=\count29
\t@sii=\count30
\t@piii=\count31
\t@siii=\count32
\t@piv=\count33
\t@siv=\count34
\t@pv=\count35
\t@sv=\count36
\t@pvi=\count37
\t@svi=\count38
\b@xi=\dimen61
\b@zi=\dimen62
\b@xii=\dimen63
\b@zii=\dimen64
\b@xiii=\dimen65
\b@ziii=\dimen66
\b@xiv=\dimen67
\b@ziv=\dimen68
\b@xv=\dimen69
\b@zv=\dimen70
\b@xvi=\dimen71
\b@zvi=\dimen72
\bb@xi=\dimen73
\bb@zi=\dimen74
\bb@xii=\dimen75
\bb@zii=\dimen76
\bb@xiii=\dimen77
\bb@ziii=\dimen78
\bb@xiv=\dimen79
\bb@ziv=\dimen80
\bb@xv=\dimen81
\bb@zv=\dimen82
\bb@xvi=\dimen83
\bb@zvi=\dimen84
\bbb@xi=\dimen85
\bbb@zi=\dimen86
\bbb@xii=\dimen87
\bbb@zii=\dimen88
\bbb@xiii=\dimen89
\bbb@ziii=\dimen90
\bbb@xiv=\dimen91
\bbb@ziv=\dimen92
\bbb@xv=\dimen93
\bbb@zv=\dimen94
\bbb@xvi=\dimen95
\bbb@zvi=\dimen96
\bbbb@xi=\dimen97
\bbbb@zi=\dimen98
\bbbb@xii=\dimen99
\bbbb@zii=\dimen100
\bbbb@xiii=\dimen101
\bbbb@ziii=\dimen102
\bbbb@xiv=\dimen103
\bbbb@ziv=\dimen104
\bbbb@xv=\dimen105
\bbbb@zv=\dimen106
\bbbb@xvi=\dimen107
\bbbb@zvi=\dimen108
\b@pi=\count39
\b@ni=\count40
\b@pii=\count41
\b@nii=\count42
\b@piii=\count43
\b@niii=\count44
\b@piv=\count45
\b@niv=\count46
\b@pv=\count47
\b@nv=\count48
\b@pvi=\count49
\b@nvi=\count50
\barno=\count51
\notes@open=\count52
\lastn@skip=\dimen109
\ut@ref=\count53
\noportee=\count54
\noinstrum=\count55
\nbporteesi=\count56
\nbporteesii=\count57
\nbporteesiii=\count58
\nbporteesiv=\count59
\nbporteesv=\count60
\nbporteesvi=\count61
\signi=\count62
\signii=\count63
\signiii=\count64
\signiv=\count65
\signv=\count66
\signvi=\count67
\transpose=\count68
\o@signi=\count69
\o@signii=\count70
\o@signiii=\count71
\o@signiv=\count72
\o@signv=\count73
\o@signvi=\count74
\cleftoksi=\toks12
\cleftoksii=\toks13
\cleftoksiii=\toks14
\cleftoksiv=\toks15
\cleftoksv=\toks16
\cleftoksvi=\toks17
\o@cksi=\toks18
\o@cksii=\toks19
\o@cksiii=\toks20
\o@cksiv=\toks21
\o@cksv=\toks22
\o@cksvi=\toks23
\metertoksi=\toks24
\metertoksii=\toks25
\metertoksiii=\toks26
\metertoksiv=\toks27
\metertoksv=\toks28
\metertoksvi=\toks29
\n@=\count75
\n@i=\count76
\n@ii=\count77
\n@iii=\count78
\toks@box=\box16
\workbox=\box17
\n@otebox=\box18
\clef@skip=\dimen110
\sign@skip=\dimen111
\temp@skip=\dimen112
\y@=\dimen113
\y@i=\dimen114
\y@ii=\dimen115
\y@iii=\dimen116
\y@iv=\dimen117
\y@v=\dimen118
\arg@suite=\toks30
\n@l=\count79
\tempsskip=\skip18
\zglueskip=\skip19
\t@gene=\toks31
\barsinline=\count80
\linesinpage=\count81
\maxbarsinline=\count82
\maxlinesinpage=\count83
\n@skip=\dimen119
\n@instrum=\count84
\h@lnlv=\count85
\hlp@width=\dimen120
\inh@alt=\count86
\bottom@adv=\dimen121
! Undefined control sequence.
\lu@slur ->\cmex 
                 \char "7A
l.1807 \setbox\n@otebox=\hbox{\lu@slur
                                      }\brace@w=\wd\n@otebox\relax
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\computewidths ->\computespecifics 
                                   \ifdim \topmargin <1pt \topmargin =\topfa...

\normal ->\ifdim \Interligne <0.1pt\computewidths 
                                                  \fi \elemskip =2\Interlign...
l.1988 \normal
              
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\computewidths ...advance \interligne by -\lthick 
                                                  \global \linewidth =\hsize...

\normal ->\ifdim \Interligne <0.1pt\computewidths 
                                                  \fi \elemskip =2\Interlign...
l.1988 \normal
              
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Missing number, treated as zero.
<to be read again> 
                   \global 
\computewidths ...\interligne by -\lthick \global 
                                                  \linewidth =\hsize \global...

\normal ->\ifdim \Interligne <0.1pt\computewidths 
                                                  \fi \elemskip =2\Interlign...
l.1988 \normal
              
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the index to The TeXbook.)

! Illegal unit of measure (pt inserted).
<to be read again> 
                   \global 
\computewidths ...\interligne by -\lthick \global 
                                                  \linewidth =\hsize \global...

\normal ->\ifdim \Interligne <0.1pt\computewidths 
                                                  \fi \elemskip =2\Interlign...
l.1988 \normal
              
Dimensions can be in units of em, ex, in, pt, pc,
cm, mm, dd, cc, bp, or sp; but yours is a new one!
I'll assume that you meant to say pt, for printer's points.
To recover gracefully from this error, it's best to
delete the erroneous units; e.g., type `2' to delete
two letters. (See Chapter 27 of The TeXbook.)

)
*\end

No pages of output.