Article View: comp.text
Article #3132Re: Imagen 12/300 OPC belt problems?
From: Larry Philps
Date: Wed, 26 Nov 1986 18:27
Date: Wed, 26 Nov 1986 18:27
22 lines
1445 bytes
1445 bytes
We have had an Imagen 12/300 here since August 1985 and have run
about 50,000 copies through it. I agree that the OPC belts are
very sensitive, but ours have been holding up fine - needing only
to be replaced about every 10,000 copies.
We only destroyed a belt once, and that was right after we got the machine.
It turns out that if you have a paper jam and just pull the paper out
of the machine, you can often scratch the belt. Our service people
told us that before clearing a paper jam you should remove the drawer
that holds the OPC belt. You can then drag the jammed paper out of the
machine without damaging anything.
Hope this is useful information.
--
Larry Philps
Engineering Computing Facility
University of Toronto
Usenet: {linus, ihnp4, allegra, decvax, floyd}!utcsri!utecfa!larry
CSNET: larry@Toronto
ARPA: larry%Toronto@CSNet-Relay
Technical Details
Message-ID:
<1937@utecfa.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utcsri!uthub!utecfa!larryReferences:
<137@uhmanoa.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10 beta 3/9/83; site utecfa.UUCP Path: arc1-ca.pugleaf.net!utzoo!utcsri!uthub!utecfa!larry From: larry@utecfa.UUCP (Larry Philps) Newsgroups: comp.text Subject: Re: Imagen 12/300 OPC belt problems? Message-ID: <1937@utecfa.UUCP> Date: Wed, 26-Nov-86 13:27:24 EST Article-I.D.: utecfa.1937 Posted: Wed Nov 26 13:27:24 1986 Date-Received: Wed, 26-Nov-86 17:28:19 EST References: <137@uhmanoa.UUCP> Organization: Engineering Computing Facility, University of Toronto Lines: 22