🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.text
Article #3448

Too good to be true ?

#3448
From: amit
Date: Sun, 01 Mar 1987 23:34
40 lines
2727 bytes
From Byte magazine, Feb 1987, the What's New section (p.38):

"		   Big Monitor Lets You See What You'll Get
		   ======================================== 
The LM-300 monitor from Princeton Graphic Systems has a 15" portrait-mounted
screen that can display a full page of graphics and text, in WYSIWIG format,
without scrolling.  Pixel resolution is 1200 by 1664. Video bandwidth is 160
MHz. Scan rate is 74.63 KHz. The monitor emulates a resolution of 300 dots per
inch (1:1 aspect ratio), making it compatible with many laser printers.  Other
features include 42,000 characters display and support for four shades of gray.
The monitor is attached to a tilt-and-swivel stand. It comes with a 9-pin
shielded cable and connects directly to IBM PC's and most compatibles.
Suggested List Price is $750.                                                 "

I also saw P.G.'s ad in one of the PC magazines (March issue), which is in
agreement with all of the above, and also talks about compatability between the
LM-300 and their 300dpi scanner, and about related software (cut-and-paste
directly in WYSIWYG format).
---------------
I have some related questions:

1. The screen  measures 15" diagonally, meaning roughly 9x12". Resolution-
   wise, we're talking 135dpi (1200/9 = 133 ; 1664/12 = 138). Now, that's an
   excellent resolution, to be sure, but not nearly as good as 300dpi. Did I
   miss anything, or is there really some sort of compression going on?
2. Hercules card, for all I know, supports resolutions up to 800x600, or so. 
   Are there widely available and reasonably priced controllers for higher
   resolutions?
3. Never heard before about the WYSIWYG format -- what is it?
4. The hint about Cut-and-Paste software suggests a format that can be both
   displayed and printed. This is in contrast to the standard TeX approach of a
   .DVI file which must be filtered separately into each output device format.

What I have in mind is a fancy-but-inexpensive TeX previewer.  Did anyone in
Netland, particularly a TeXpert, take a closer look at the beast? Can they
address some of the questions?

Neta Amit (amit@umn-cs.ARPA)
University of Minnesota CSCI
Technical Details
Message-ID: <1347@umn-cs.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!dayton!umn-cs!amit

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watnot!watmath!clyde!rutgers!dayton!umn-cs!amit
From: amit@umn-cs.UUCP
Newsgroups: comp.text,comp.sys.ibm.pc,comp.terminals
Subject: Too good to be true ?
Message-ID: <1347@umn-cs.UUCP>
Date: Sun, 1-Mar-87 18:34:23 EST
Article-I.D.: umn-cs.1347
Posted: Sun Mar  1 18:34:23 1987
Date-Received: Mon, 2-Mar-87 20:05:50 EST
Reply-To: amit@umn-cs.UUCP (Neta Amit)
Distribution: na
Organization: University of Minnesota
Lines: 40