🚀 go-pugleaf

In article <7695@mimsy.UUCP>, chris@mimsy.UUCP (Chris Torek) writes:
> In article <782@sol.ARPA> ken@rochester.arpa (Ken Yap) writes:
> >The problem is that standard DVI drivers are required to leave an 1 in
> >margin at the top and left.
> ... 

I am not sure how it can be done using LaTeX, but I wrote my thesis using
some plain TeX macros I wrote myself and had the page numbers up on the
right corner. Looking at my thesis, it happens that the number is about
0.75~in in from the right edge of the paper, and is about (what do you know)
0.75~in from the top; the right hand margin of my text is 1.25~in from the
right edge.  If you are interested, I can e-mail you, Greg, my macro file.

I don't think one needs a DVI driver to be capable of doing -ve skips, I
did the above using the IMPRINT DVI driver for an IMAGEN laser printer; the
same also works under Micro-TeX using the EPSON DVI driver from Addison-Wesley.

... Peter/

-------------------------------------------------------------------------------
Peter Kuo                   | Bitnet (VMS)  : KUO@SASK
Accelerator Laboratory      |
(a.k.a. The Beam Warehouse) | uucp   (Unix) : !alberta\
Univ. of Saskatchewan       |                 !ihnp4  -- !sask!skatter!kuo
Saskatoon, Saskatchewan     |                 !utcsri /
CANADA  S7N 0W0             |
(Earth)                     | Ma Bell       : (306) 966-6059

Disclaimer: I don't know what I am saying, I'm only a physicist.
            Don't quote me on anything! I speak only for myself.