Problems with Quadratron WP software

Article View: comp.text

Article #4374

#4374

From: 0000-Scott Holt(0000)
Date: Fri, 05 Feb 1988 14:16

26 lines
1578 bytes

	Does anyone out there have any familiarity with an office
	automation package called Qoffice (from Quatratron)? We
	just brought it up on one of our systems here and seem to
	be having some problems configuring a printer for it. We
	are using a Fujitsu 5600 printer in Epson FX80 emulation 
	mode. With the standard printer description Quatratron 
	provides with the software, the line spacing on all our
	documents is totally messed up. 

	Compared to what is published in the in the Epson and Fujitsu
	manuals, the FX80 definition provided with Qoffice looks correct.
	I don't think its a problem with fujitsu's emulation as we have
	been using the printer this way for quite some time. Also, I
	had Qoffice dump the document to a file rather than printing
	it. The escape sequences included in the document would have caused
	the spacing problems.


			Thanx in advance,
			Scott Holt

-----------------------------------------------------------------------------
Scott Holt                                        Paradyne Corporation 
..!gatech!codas!usfvax2!pdn!pdntg1!scott         8550 Ulmerton Rd MS-LF207
						  Largo, FL. 34649

Technical Details

Message-ID: <2204@pdn.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!cmcl2!rutgers!mtune!codas!usfvax2!pdn!pdntg1!scott

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!husc6!cmcl2!rutgers!mtune!codas!usfvax2!pdn!pdntg1!scott
From: scott@pdntg1.UUCP (0000-Scott Holt(0000))
Newsgroups: comp.text,comp.misc,misc.wanted
Subject: Problems with Quadratron WP software
Message-ID: <2204@pdn.UUCP>
Date: 5 Feb 88 14:16:45 GMT
Sender: usenet@pdn.UUCP
Reply-To: scott@pdn.UUCP (Scott Holt)
Organization: Paradyne Corporation, Largo, Florida
Lines: 26