Re: non-laser output

Article View: comp.text

Article #4845

#4845

From: Ken Yap
Date: Wed, 06 Jul 1988 04:34

17 lines
1293 bytes

|I am looking into switching from a macintosh system over to unix (it's too
|awkward programming the mac). I don't have access to a laser printer (at
|least, not always), but I want to be able to get 150dpi output from a normal,
|high resolution, printer. I can do it on the mac, but I want to know if
|there's anything out there like TeX for a dot matrix printer (or if TeX can
|run on a dmp).

Yes, you can definitely print TeX DVI files on DMPs. Just get a driver
for DVI to your favourite DMP and a set of fonts at the right
resolution.  It may be slow (you may have to go into graphics mode) and
the results will be envious of laser printer output but it is readable.
Some people around here use 144 dpi and 240 dpi DMPs at home.

A good place to start might be the Nelson Beebe DVI drivers on
science.utah.edu in directory aps:<tex.dvi>.

	Ken

Technical Details

Message-ID: <11112@sol.ARPA>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!ukma!tut.cis.ohio-state.edu!rutgers!rochester!ken

References: <1466@csadfa.oz> <249@wjh12.harvard.edu> <428@proxftl.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!ukma!tut.cis.ohio-state.edu!rutgers!rochester!ken
From: ken@cs.rochester.edu (Ken Yap)
Newsgroups: comp.text,comp.fonts
Subject: Re: non-laser output
Message-ID: <11112@sol.ARPA>
Date: 6 Jul 88 04:34:53 GMT
References: <1466@csadfa.oz> <249@wjh12.harvard.edu> <428@proxftl.UUCP>
Reply-To: ken@cs.rochester.edu (Ken Yap)
Organization: U of Rochester, CS Dept, Rochester, NY
Lines: 17

Reply to Parent Message