FrameMaker Under HPUX (Any Users?)

Article View: comp.text

Article #6176

#6176

From: Marc Ries
Date: Fri, 21 Apr 1989 19:25

21 lines
1158 bytes

  Are there any HP HP-UX FrameMaker users out there?

  If so, would you mind commenting on:

   1) Which laser printers you are using for output?

   2) Are  you  using  the  stock  FrameMaker  "frame2pcl"
      (Frame  to  Postscript  Command Language) filter for
      printing?  The stock method (frame2pcl) seems NOT to
      be  the most efficient method (i.e., not letting the
      printer itself process the PCL).  As an  example,  a
      20  page  set  of viewgraphs ended up as a 16 MB (!)
      data file shipped directly to the printer.

                 Thanks in advance,

     Marc Ries
           <somewhere>!ries

     "PHOTOVOLTAICS: safe/clean Electricity from the SUN"

Technical Details

Message-ID: <1747@spp2.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!wiley!spp2!ries%arcturus

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!lll-winken!uunet!wiley!spp2!ries%arcturus
From: ries@arcturus (Marc Ries)
Newsgroups: comp.text,comp.sys.hp
Subject: FrameMaker Under HPUX (Any Users?)
Keywords: Which laser printers, which frame2pcl filters
Message-ID: <1747@spp2.UUCP>
Date: 21 Apr 89 19:25:28 GMT
Sender: news@spp2.UUCP
Reply-To: ries@spp2.UUCP (Marc Ries)
Distribution: na
Organization: TRW SEDD
Lines: 21