Help CD ROM & BSDI

Thread View: comp.unix.internals

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Joseph Stroup Sun, 03 Jan 1993 04:01

#2412

Author: Joseph Stroup
Date: Sun, 03 Jan 1993 04:01

23 lines
1396 bytes

To make a long story short I have BSDI Gamma .0.9.4 and a Mitsumi CD ROM.
They say to set the CD up as Port 340 IRQ 2/9 and DRQ as 3. If anyone
of you experts has done this please e-mail me with the settings. 

I have set the jumpers to IRQ and the port correctly but there is not
a spot for the DMA jumper 3 on 5,6 and 7. The Rom works fine under dos 5
and I tried to run the install. It gets to the root question looking
for the device name , then I enter the  CD ROM code mcd0 after that it
see's the rom and hangs. The box its on is running a Conner IDE drive
and I know that one reason why the different settings.

I know that something simple will fix this and I have hardware all over
the place. I also have e-mail into BSDI and will call Monday a.m. Meanwhile
I just hoped one of you out there in Net land has done this andis running
this.

                  Email  josephs@garnet.msen.com

                  Thanks in advance.
                  `:wq
                  
-- 
Joseph Stroup

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads