Thread View: comp.unix.microport
1 messages
1 total messages
Started by Russell Day
Fri, 31 Jul 1992 01:43
Microport cactus, newsfeed dead, spouse rabid
Author: Russell Day
Date: Fri, 31 Jul 1992 01:43
Date: Fri, 31 Jul 1992 01:43
70 lines
2869 bytes
2869 bytes
I am in trouble. The machine which supplies my wife with
access to alt.callahans, rec.sewing, etc seems to have trashed
it's disk. I am at a loss, and in severe danger of great
suffering.
Here is the story - all help is appreciated.
The machine is a 286 running microport. It has 2MB ram and a
42MB ST506 disk which is a type 17.
One fine day, I boot it, and after it checks memory and comes
up with the hardware config information, it says unto me:
Error loading system from fixed disk.
It normally says
noise[system5]:
then after a suitable delay starts the boot.
Obviously, it cant read the boot block from the primary
partition. It seems that this is a part of Microport.
Now, I have cnews and a whole bunch of stuff on this machine.
Naturally, no-one in his right mind would want to back up 38
MB onto floppies, so I dont have a recent backup. I would
dearly like to get my bytes back. Recompiling the news
software on a 286 is a sad business. Plus the missus wants
her goodies back too ("You arsehole, why didnt you take
backups?" "Duh - Ummm.")
Some test were run:
All BIOS read and seek tests pass.
I can boot unix from the floppy.
fdisk describes the Unix and Dos partitions correctly.
I can boot dos (first 100 cyls of disk).
So the drive and the partition table are both ok.
Having booted DOS, I try the following:
mount /dev/dsk/0s0 onto /mnt
It says 'Drive 0 Type 15'
Error reading super block.
It is getting a disk error trying to read head 5 sector 1.
This is a no-no because the drive has only 5 heads numbered
0-4. And it is a type 17, not a type 15 as stated. I can
understand that it thinks that the super block is creamed. I
dont know why it wants a type 15 drive, when the cmos setup,
and fdisk, all agree that it is a type 17. Is it on drugs?
So I muck about some more, and I get to a stage where
mount /dev/dsk/0s0
returns
Not a file system.
And
divvy -d
returns
Invalid partition end record.
(This may be because the selected partition was somehow changed
to be the dos partition - I didnt think of this at the time, and
now I am here, not there, and cant check. )
So the question of the day is:
Why does the boot floppy decide my disk is a type 17
when all the indications are that everything else
thinks it is a type 15?
Any hints?
(For that matter, is there anyone out there?)
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads