🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.unix.programmer
Article #1203

Re: Setting RS232 port to 8 bits on Tektronix 4301 (mod 4.2 BSD)

#1203
From: David Burren [Athos]
Date: Thu, 15 Nov 1990 15:45
22 lines
1885 bytes
In <1990Nov14.214019.25745@batcomputer.tn.cornell.edu> jeff@theory.tn.cornell.edu (Jeff Miller) writes:

>Using a VT340 terminal I have sent commands to the recorder 
>through the RS232 successfully, using 8 bit, even parity mode.  However,
>the Tektronix is sending out 7 bit bytes.  I have been researching ioctl
>commands to change the port to sending 8 bits, but have not had any luck.

>Please e-mail responses to jeff@theory.tn.cornell.edu.  Thanks.

I'd be interested to see any responses summarized to the net, as I've recently
hit the same problem.
Some Motorola radio equipment I have to interface to uses 8 data bits and
even parity, and I could not convince my Sony 1750 to talk to it.
In the system installation the Motorola equipment will be connected via a
Xylogics Annex, and I've managed to get the Annex to talk 8E1, so my problem
is solved for now.
But as far as I could see there was no way to get the Sony (it's Unix is what
I'd call a Sony port of 4.3BSD-Tahoe) to talk 8E1.  8N1 or 7E1 yes, 8E1 no.
_______________________________________________________________________
David Burren (Wookie Athos)	      Work:   david@bacchus.esa.oz.au
Software Development Engineer	      Home:   athos%eyrie@labtam.oz.au
Expert Solutions Australia	      School: s872007@otto.rmit.oz.au
Technical Details
Message-ID: <s872007.658683924@otto>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!goanna!minyos!otto!s872007
References: <1990Nov14.214019.25745@batcomputer.tn.cornell.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!goanna!minyos!otto!s872007
From: s872007@otto.bf.rmit.oz.au (David Burren [Athos])
Newsgroups: comp.unix.programmer,comp.unix.misc
Subject: Re: Setting RS232 port to 8 bits on Tektronix 4301 (mod 4.2 BSD)
Message-ID: <s872007.658683924@otto>
Date: 15 Nov 90 15:45:24 GMT
References: <1990Nov14.214019.25745@batcomputer.tn.cornell.edu>
Sender: news@minyos.xx.rmit.oz.au
Followup-To: comp.unix.programmer
Organization: Faculty of Business, RMIT, Melbourne, Australia
Lines: 22