Thread View: comp.unix.sys5.r4
3 messages
3 total messages
Started by Willem van Biljon
Mon, 21 Feb 1994 12:20
ld dies on ncr3000 svr4
Author: Willem van Biljon
Date: Mon, 21 Feb 1994 12:20
Date: Mon, 21 Feb 1994 12:20
14 lines
1078 bytes
1078 bytes
During compilation with gcc 2.5.7 the system linker /usr/bin/ld dies with the message "unable to allocate memory". This is the first time the linker has died in this manner, usually compilation works perfectly. I've checked that there is enough swop space and memory. Raising MAXUMEM has no effect. Any ideas? Help would be appreciated. Willem van Biljon Jigsaw Software
Re: ld dies on ncr3000 svr4
Author: paulz
Date: Tue, 22 Feb 1994 13:58
Date: Tue, 22 Feb 1994 13:58
27 lines
1517 bytes
1517 bytes
In article <2ka8va$pe7@itu1.sun.ac.za>, Willem van Biljon <wvb@cs.sun.ac.za> wrote: > >During compilation with gcc 2.5.7 the system linker >/usr/bin/ld dies with the message "unable to allocate >memory". > >This is the first time the linker has died in this manner, >usually compilation works perfectly. I've checked that there >is enough swop space and memory. Raising MAXUMEM has no effect. > >Any ideas? Help would be appreciated. To avoid this I have the following entries in my /etc/conf/cf.d/stune : HDATLIM 0x7fffffff SDATLIM 0x7fffffff HSTKLIM 0x7fffffff SSTKLIM 0x7fffffff HVMMLIM 0x7fffffff SVMMLIM 0x7fffffff This sets all process-size limits to unlimited. -- Paul van der Zwan paulz@olivetti.nl Olivetti Nederland B.V. paulzn@olivetti.nl (NeXT-mail)
Re: ld dies on ncr3000 svr4
Author: Lars_Tunkrans
Date: Tue, 22 Feb 1994 22:13
Date: Tue, 22 Feb 1994 22:13
27 lines
1791 bytes
1791 bytes
wvb@cs.sun.ac.za (Willem van Biljon) writes: >During compilation with gcc 2.5.7 the system linker >/usr/bin/ld dies with the message "unable to allocate >memory". >This is the first time the linker has died in this manner, >usually compilation works perfectly. I've checked that there >is enough swop space and memory. Raising MAXUMEM has no effect. >Any ideas? Help would be appreciated. What about SVMMLIM, HVMMLIM, SDATLIM and HDATLIM ? I had a similar problem once when trying to link very large binaries ( typically generated with 4GL stuff ) and the process Vertiual Memmory Limit was set to 16 Mb. When it was changed to 32 Mb and the Data size limit also was increased somewhat the linking worked ok. //Lars. -- _______________________________________________________________________________ Lars Tunkrans DRS Product Centre Phone: +46 (0)87937419 FAX: +46 (0)87938109 DOMAIN Address: ltu@icl.se X400 Gateway: l.tunkrans@swe2007.wins.icl.co.uk X400: I=L;S=Tunkrans;OU1=SWE2007;ORG=ICL;PRMD=ICL;ADMD=400NET;C=SE
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads