Re: VGA Under V/AT

Article View: comp.unix.sysv286

Article #16

#16

From: dragos
Date: Mon, 24 Sep 1990 06:46

15 lines
1025 bytes

In article <99@dalek.UUCP> sjb@dalek.UUCP (Seth J. Bradley) writes:
>So long as I stick to text only, can I use any PC graphics
>adapter under V/AT 2.3, including the Hi-Res VGA boards?
>If not, is there a driver available?

  I only tried it with a Compaq VGA running V/AT 2.3 about two years ago.
  The system worked fine, but the VGA was not reset into text mode after
  boot, so consequently nothing could be seen on the screen. Serial terminals
  worked though.

-- 
Dragos Ruiu (ruiu@dragos.uucp)               Copyright(c) 1990 Dragos Ruiu
uunet!myrias!dragos!ruiu

Technical Details

Message-ID: <1990Sep24.064603.9539@dragos.uucp>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!snorkelwacker!mit-eddie!uw-beaver!ubc-cs!alberta!adec23!dragos!ruiu

References: <99@dalek.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!snorkelwacker!mit-eddie!uw-beaver!ubc-cs!alberta!adec23!dragos!ruiu
From: ruiu@dragos.uucp (dragos)
Newsgroups: comp.unix.sysv286
Subject: Re: VGA Under V/AT
Message-ID: <1990Sep24.064603.9539@dragos.uucp>
Date: 24 Sep 90 06:46:03 GMT
References: <99@dalek.UUCP>
Reply-To: ruiu@dragos.UUCP (dragos)
Organization: Orbital Mind Control Lasers, Inc.
Lines: 15

Reply to Parent Message