Thread View: comp.windows.misc
4 messages
4 total messages
Started by Yau Felix Chung
Sun, 06 Sep 1992 17:19
Speeding up Win 3.1
Author: Yau Felix Chung
Date: Sun, 06 Sep 1992 17:19
Date: Sun, 06 Sep 1992 17:19
24 lines
1001 bytes
1001 bytes
Hello everyone! I was wondering if someone could help me out. It seems that ever since I installed windows 3.1, everything in my system seems to run slower, e.g. loading applications such as Ami Pro 3.0. My config.sys file looks like this: DEVICE=D:\WINDOWS\HIMEM.SYS DEVICE=D:\WINDOWS\EMM386.EXE RAM 2048 DEVICEHIGH=D:\WINDOWS\SMARTDRV.EXE 512 256 DOS=HIGH,UMB DEVICEHIGH=E:\ATIULTRA\VANSI.SYS DEVICE=E:\ATIULTRA\RAMBIOS.SYS FILES= 25 BUFFERS=20 STACKS=0,0 SHELL=E:\DOS\COMMAND.COM E:\DOS\ /E:200 /P FCBS=1 LASTDRIVE=G and I am running Win 3.1 on a 386-25 Gateway with 6.25 Meg and a 165Mb ESDI hard drive. Any suggestions are welcomed......-F.
Re: Speeding up Win 3.1
Author: Kinsley Wong
Date: Mon, 07 Sep 1992 06:46
Date: Mon, 07 Sep 1992 06:46
37 lines
1605 bytes
1605 bytes
In article <fa2y-lh@rpi.edu> chungy2@aix.rpi.edu (Yau Felix Chung) writes: >Hello everyone! I was wondering if someone could help me out. >It seems that ever since I installed windows 3.1, everything in >my system seems to run slower, e.g. loading applications such as >Ami Pro 3.0. > >My config.sys file looks like this: > >DEVICE=D:\WINDOWS\HIMEM.SYS >DEVICE=D:\WINDOWS\EMM386.EXE RAM 2048 >DEVICEHIGH=D:\WINDOWS\SMARTDRV.EXE 512 256 >DOS=HIGH,UMB >DEVICEHIGH=E:\ATIULTRA\VANSI.SYS >DEVICE=E:\ATIULTRA\RAMBIOS.SYS >FILES= 25 >BUFFERS=20 >STACKS=0,0 >SHELL=E:\DOS\COMMAND.COM E:\DOS\ /E:200 /P >FCBS=1 >LASTDRIVE=G > >and I am running Win 3.1 on a 386-25 Gateway with 6.25 Meg and a 165Mb ESDI >hard drive. > >Any suggestions are welcomed......-F. > I thing if you change STACKS=9,615 it might help. Definitely REM out Shell=E:.... good luck -- Internet: kiwong@iris.calpoly.edu Voice Mail: (805) 756-5603 Bitnet: DU338@oasis.calpoly.edu Fax : (805) 756-5666 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~ Surfing, Scuba, Sky Diving, Skating, Mountain Biking ==> Adrenaline Junkies
Re: Speeding up Win 3.1
Author: Richard Jennings
Date: Tue, 08 Sep 1992 07:59
Date: Tue, 08 Sep 1992 07:59
55 lines
2798 bytes
2798 bytes
In comp.windows.misc, Yau Felix Chung writes...
>My config.sys file looks like this:
>
>DEVICE=D:\WINDOWS\HIMEM.SYS
>DEVICE=D:\WINDOWS\EMM386.EXE RAM 2048
Do you really need 2MB of EMS? This is 2MB that can't be used for XMS
(and thus can't be used by Windows and SmartDrive). What are you
running that needs EMS?
>DEVICEHIGH=D:\WINDOWS\SMARTDRV.EXE 512 256
Not a very big cache (512K). Evan smaller when Windows starts to run
low on memeory (256K). Try increasing both numbers to to 1024 or even
2048 if what you do is very disk-intensive. It's a tradeoff.
A general point: SmartDrive is not a very good cache, relatively
speaking. A plug here is overdue for Hyperware's HyperDisk
(RR#1 Box 91, Pall Mall TN 38577 USA 1-615-864-6868). High quality
shareware (so try before you buy) at a very realistic price. And sh*t
fast, compared with SmartDrive. Some folks have spoken about
Super-PC-Kwik in similar terms (I've not tried it). I have, however,
tried Norton's cache and didn't find it better than SmartDrive. Your
mileage may vary.
>FILES= 25
MS recommend 50 or 60 files these days. This isn't going to effect your
speed, but tends to help stability (!).
>SHELL=E:\DOS\COMMAND.COM E:\DOS\ /E:200 /P
MS recommends /E:512 as a minimum. Again, this isn't going to effect
your speed.
Hope this helps,
richi.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -
Richard Jennings, Snr. Software Development Engineer
Pinewood Information Systems Division, the home of HP's Advanced
----------------------------------------- Image Management System (HP AIMS),
AdvanceLink, OpenMail and Multi-media communications
Mailstop PINE11H2 --------------------------------------
Hewlett-Packard Voice: (+44)/(0) 344 763738 ADMD=GOLD 400 C=GB
Nine Mile Ride Fax: (+44)/(0) 344 763526 OU1=Pinewood ORG=hp
Wokingham RG11 3LL E-mail: richi@hpopd.pwd.hp.com GN=Richard PRMD=hp
England or: richi@hpopd.pwd.hp.co.uk SN=Jennings
--
This article represents only the opinion(s) of its author, and is not an
official or unofficial position of, or statement by, the Hewlett-Packard
Company. The text is provided for informational purposes only. It is
supplied without warranty of any kind.
EMM386.exe (Re: Speeding up Win 3.1)
Author: Benjamin Wai
Date: Tue, 08 Sep 1992 21:17
Date: Tue, 08 Sep 1992 21:17
16 lines
1221 bytes
1221 bytes
Can anyone please explain more about the function of EMM386.EXE? I was not clever enough to understand fully how it functions from the manual"s". The thing I know is that it can push half of my drivers up to the high memory block, and free up at least 100K of my base memory space. The main problem came from the parameters, ie, what is and when to use noems, ram, etc. Also, whenever the EMM386.exe is loaded, pressing CTRL, ALT plus a random key would simply hang the machine -- even with CTRL, ALT+DEL, ie, it would not warm boot the computer. Does this meant to happen? Many thanks in advance for any help. - Benjamin Wai < wai@cn.ecn.purdue.edu > < wai@sage.cc.purdue.edu >
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads