🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.windows.misc
4 messages
4 total messages Started by Andrew H Cowan Mon, 20 Aug 1990 17:32
Does X run over WIN/TCP?
#272
Author: Andrew H Cowan
Date: Mon, 20 Aug 1990 17:32
28 lines
1620 bytes
I am having trouble getting DecWindows to work over Wollingong's
WIN/TCP.  Does anyone know if this is "supposed" to work, or is
this another reason to buy Multinet TCP?

I have a Vax VMS running Multinet TCP/IP and use DecWindow X
applications by doing the following commands:
	>:: set disp/creat/trans=tcpip/node=111.222.33.44
	>:: run sys$system:decw$clock

When I try the same thing on a Vax VMS running WIN/TCP I get this
error message:
	>:: set disp/creat/trans=wintcp/node=111.222.33.44
	>:: run sys$system:decw$clock
	X Toolkit Error: Can't Open display
	%DWT-F-DWTABORT, xtoolkit fatal error

What am I doing wrong?  Does _anyone_ have X applications/DecWindows
running over WIN/TCP?

-AC
        **                   /   \                   **
     ** **                  |     |                  **
     ** ** **                \___/                   ** **
     ********                                        ** **
      ******         __                  **          ****
        **        \_/oo\_/              ****         **
........**..........\||/................****.........**...........
Andy Cowan...........||.............cowan@soleil.sps.mot.com......
Re: Does X run over WIN/TCP?
#273
Author: Mike Iglesias
Date: Mon, 20 Aug 1990 20:46
44 lines
2108 bytes
In article <2382@dover.sps.mot.com> cowan@soleil.sps.mot.com.UUCP (Andrew H Cowan) writes:
>I am having trouble getting DecWindows to work over Wollingong's
>WIN/TCP.  Does anyone know if this is "supposed" to work, or is
>this another reason to buy Multinet TCP?

The WIN/TCP DECwindows transport works fine here between our VAXcluster
running VMS 5.3-1, our DECstations (3100 w/R4, 5000 w/DECwindows), and
our Suns (X11R4).  

>I have a Vax VMS running Multinet TCP/IP and use DecWindow X
>applications by doing the following commands:
>	>:: set disp/creat/trans=tcpip/node=111.222.33.44
>	>:: run sys$system:decw$clock
>
>When I try the same thing on a Vax VMS running WIN/TCP I get this
>error message:
>	>:: set disp/creat/trans=wintcp/node=111.222.33.44
>	>:: run sys$system:decw$clock
>	X Toolkit Error: Can't Open display
>	%DWT-F-DWTABORT, xtoolkit fatal error
>
>What am I doing wrong?  Does _anyone_ have X applications/DecWindows
>running over WIN/TCP?

There are a couple of things to check:

  1.  Make sure you did an xhost on the server for the VMS system
      that's trying to open the window(s).

  2.  Make sure you've installed the DECW$TRANSPORT_WINTCP.EXE image.
      I put the following command in TWG$TCP:[NETDIST.MISC]INSTALL.COM:

        sys$share:decw$transport_wintcp /open/share/head/prot

      so that it gets installed automatically whenever WIN/TCP is 
      started.



Mike Iglesias
University of California, Irvine
Internet:    iglesias@orion.oac.uci.edu
BITNET:      iglesias@uci
uucp:        ...!ucbvax!ucivax!iglesias
Re: Does X run over WIN/TCP?
#274
Author: Darren Griffiths
Date: Mon, 20 Aug 1990 23:20
13 lines
1127 bytes
In article <2382@dover.sps.mot.com> cowan@soleil.sps.mot.com.UUCP (Andrew H Cowan) writes:
>I am having trouble getting DecWindows to work over Wollingong's
>WIN/TCP.  Does anyone know if this is "supposed" to work, or is
>this another reason to buy Multinet TCP?

This is another reason to buy Multinet.  As of three months ago (the last
time I was unlucky enough to use TWiGs TCP/IP) it didn't have support for
X-windows and I haven't heard of any plans that they are going to support it.

>Andy Cowan...........||.............cowan@soleil.sps.mot.com......

  Cheers,
   --darren
Re: Does X run over WIN/TCP?
#279
Author: David S. Herron
Date: Wed, 22 Aug 1990 20:27
16 lines
1252 bytes
In article <2382@dover.sps.mot.com> cowan@soleil.sps.mot.com.UUCP (Andrew H Cowan) writes:
>What am I doing wrong?  Does _anyone_ have X applications/DecWindows
>running over WIN/TCP?

I presume that is the TCP/IP we have on the machine down the hall.
The PE guys have a Vax-station running VMS & DECWindow's.  They've
run applications there and displayed 'em on other X servers, including
Sun's.  Wouldn't make a lot of sense for us to be using somebody
elses TCP/IP, now would it? ;-)

But then whaddoIknow?  I work on Unix...
-- 
<- David Herron, an MMDF weenie, <david@twg.com>
<- Formerly: David Herron -- NonResident E-Mail Hack <david@ms.uky.edu>
<-
<- Sign me up for one "I survived Jaka's Story" T-shirt!
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads