Errors compiling LARGE model with MS C++ 7.0 and MFC

Thread View: comp.windows.ms.programmer

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by David Gunter Tue, 12 Jan 1993 16:46

#3498

Author: David Gunter
Date: Tue, 12 Jan 1993 16:46

23 lines
1742 bytes

We're trying to develop a Windows program using Microsoft C/C++ 7.0
and the Microsoft Foundation Class (MFC) Library. Our target platform
is a 486 running Windows 3.1.  The program is designed to run in
enhanced mode ONLY.

Everything compiles and runs just fine under MEDIUM model. When we
decided to compile under LARGE model, the program crashes with a GPF 
in the startup code.  WinMain is NEVER reached. (Yes, I rebuilt the MFC
libraries as LARGE model libraries :-)

We've been unable to track this down so far. Basically, it dies in the
startup code.  Does anyone have any ideas/solutions/information/spells 
about this?

==================================================================
Dave Gunter *** Wandel & Goltermann Technologies *** gunter@wg.com
==================================================================

--
   The opinions expressed are not necessarily those of the University of
     North Carolina at Chapel Hill, the Campus Office for Information
        Technology, or the Experimental Bulletin Board Service.
           internet:  laUNChpad.unc.edu or 152.2.22.80

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads