Can't print using Novell 2.12a and Windows 3.0

Thread View: comp.windows.ms.programmer

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Pablo Ahumada Mon, 13 Apr 1992 17:46

#374

Author: Pablo Ahumada
Date: Mon, 13 Apr 1992 17:46

48 lines
1817 bytes

Hi everyone !

I hope that somebody can help me.
I have problems to print with "Novell 2.12a" and Windows 3.0.

When I am in Windows 3.0 and print from EXCEL o WORD the first line
in the printer has garbage (%^&$), the next 10 lines are printed
correctly, and then the lines are cut or with garbage or ....

The first time I think that Windows was not correctly installed,
but I conected the printer in the parallel port of the station
and it works fine.

When Windows was installed I select the option "Novell netware
version 2.10 and above".

The novell command NVER gives this information:

	   The NetWare NetBIOS module is not loaded,
		unable to provide version information.

	   IPX Version: 3.01
	   SPX Version: 3.01

	   LAN Driver:	NetWare Ethernet NE1000  V3.00EC (891227) V1.00
			IRQ = 3, I/O Base = 300h, no DMA or RAM

	   Shell:	V3.26 Rev. A
	   DOS: 	MSDOS V5.00 on IBM_PC

	   FileServer:	ARS
	       Novell	Advanced NetWare 286 V2.12 Rev. A   8/12/88


My printer is a 'PANASONIC KX-P1592 Multi Mode' conected to LPT1: in the
server. In Windows I select IBM-Proprinter.


Thanks in advance por your help.

 ______________________________________________________________
 >							      <
<     &8^)* PAM./					       >
 >							      <
<  Nombre     : Pablo Ahumada Mardones			       >
 > UUCP       : pam@vandi.ars.cl, ...!uunet!uchdcc!vandi!pam  <
<______________________________________________________________>

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads