Article View: comp.windows.ms
Article #11533Re: Need A Windows 3.0 Monitor > 21" And > 1280 x 1024 Resolution
From: george.w.erhart
Date: Sat, 04 May 1991 13:20
Date: Sat, 04 May 1991 13:20
17 lines
1288 bytes
1288 bytes
In article <41952@cup.portal.com> Will@cup.portal.com (Will E Estes) writes: >I have started to realize that you just can't get enough desktop, and >honestly if I could buy a 30" monitor with 2048 x 1280 resolution and >a *good* >Windows 3.0 driver I would get it. On a similar vein ... I have always been impressed by the Macs ability to handle a multihead display. Is there any way to do this in a PC and have Windows recognize/handle both displays? From what I know about the PC hardware, there are some severe restrictions. BUT, if an 8514/A type display can co-exist with a VGA card, why can't a Windows display driver allow both the VGA and the 8514/A to be used at the same time. (Assuming that you had two monitors.) -- George Erhart AT&T Bell Laboratories att!archie!gwe
Technical Details
Message-ID:
<1991May4.132027.11659@cbnews.cb.att.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!caen!uwm.edu!linac!att!cbnews!gweReferences:
<41952@cup.portal.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!caen!uwm.edu!linac!att!cbnews!gwe From: gwe@cbnews.cb.att.com (george.w.erhart) Newsgroups: comp.windows.ms,comp.sys.ibm.pc.hardware Subject: Re: Need A Windows 3.0 Monitor > 21" And > 1280 x 1024 Resolution Message-ID: <1991May4.132027.11659@cbnews.cb.att.com> Date: 4 May 91 13:20:27 GMT References: <41952@cup.portal.com> Organization: AT&T Bell Laboratories Lines: 17