🚀 go-pugleaf

In article <7269@hydra.gatech.EDU> mmitchel@msd.gatech.edu (Mark A. Mitchell) writes:
>In article <327@spot.wbst128.xerox.com> tomer@rainbow.UUCP (Shmuel Tomer) writes:
>>I am using an ATI-VGA Wonder card (in a Gateway 386/20 machine, 4MB
>>RAM, 65 MB hdd). I have a serious performance problem when using
>>Windows (either 286 or 386) in the 1024x768 mode, using the driver
>>provided by ATI, revision 1.03. 

>>Two operations in particular take unreasonable time. Moving a window
>>around on the screen results in a VERY slow repainting of the
>>window - this take between 10 to 30 (!) seconds. Scrolling a text
>>editor (notepad, write etc.) by a single line, either using arrow keys
>>or by clicking on the arrows in the scroll bar, is also VERY slow.

>>Does anybody experience the same problems, or, better yet, does
>>anybody know of a way to improve the situation? Any information will be
>>appreciated.


	I have experienced exactly the same thing. It is particular bad when
you need to repaint a DOS-apps window. A Windows window is slow but perhaps
just useable. A DOS-apps window can take 30secs to repaint !!!
	I also called ATI and they also said that it was what it was, and
there was nothing to do about it. They recommended using 800x600 mode.
	800x600 IS a slot faster and quite useable. That is the way I use
the ATI card now.


>
>I'm using a Video Seven VGA 1024i with Windows in 1024x768 resolution and
>I don't experience these problems.  The redraw of moved windows, in fact,
>is nearly imperceptable.  (My machine is comparable: Dell System 310, only
>2 MB RAM.)  I am using Windows/286 rather than /386 because of some 
>incompatibilities, but it would seem to me that this would make it slower if
>it has any effect at all.  I have Windows/386 as well, so I'll try the same
>operations with it when I get a chance.

	I have, on another machine, a Video 7 VRAM card. That card is FAST.
Works great with Windows 386, EXCEPT that the drivers have a bug such that
when using the VRAM with DOS 4.01, a DOS-apps always defaults to the A: drive.
This drives (:-)) me crazy. Video 7 claims this bug will be fixed in a new
release SOON.
	Does your VGA 1024i board have this problem ?

>If ATI says that this is normal performance, then they must be way behind
>Video Seven. 

	Agreed. The greatest thing about the ATI board is the built in
mouse port which save a board or COM port. Unfortunately Gateway's ATI
board doesn't include the mouse port. This is the biggest beef I have with
Gateway. Otherwise, I'm a happy Gateway customer five times over. BTW, I
hope you got the NEC 3D monitor from Gateway (an extra $100, but worth it.)
	It sounds like you should send the ATI board back to Gateway, get
the $200 credit and get the VGA 1024i (or the ATI with the mouse and live
with 800x600 resolution.)