🚀 go-pugleaf

Thanks to all who had sent me mails or posted their experiences in the
conference.  Following is the message from the wizard who has same 
equipment as I do and had solved the problem.  

Special thanks to you, Juergen.  One addition here is that I didn't
use the setup disk to screen redirection but used the ROM setup, and
it worked!  

_Tony

============================
From jsh@alice.att.com Sun Nov 18 06:42:29 1990
Received: from INET.ATT.COM by silver.ucs.indiana.edu
	(5.61+/9.2jsm) id AA00446; Sun, 18 Nov 90 06:42:28 -0500
From: jsh@alice.att.com
Date: Sun, 18 Nov 90 06:39:25 EST
To: tcheng@silver.ucs.indiana.edu
Tony: 
Status: RO

I'm using exactly the same machine and HAD exactly the same problem.  PLEASE
read the "readme.txt" file in c:\windows: it tells you that windows does not
like redirected com-ports.  Unfortunately, the AT&T 6386/25 Intel box comes
~v
--------
From jsh@alice.att.com Sun Nov 18 06:48:33 1990
Received: from INET.ATT.COM by silver.ucs.indiana.edu
	(5.61+/9.2jsm) id AA00473; Sun, 18 Nov 90 06:48:32 -0500
From: jsh@alice.att.com
Date: Sun, 18 Nov 90 06:42:49 EST
To: tcheng@silver.ucs.indiana.edu
Tony: 
Status: R

Sorry, hit the wrong key.  Correction:  Windows does not like redirection
of the screen to com-ports.  Unfortunately, the WGS comes with screen
redirection enabled to com2.  You have to run the SETUP from you customer
diskette (not the ROM-version!) to disable screen redirection.  After that,
the puzzle it solved....  I ran into the same trap and only found the
solution after reading EVERY page of the windows manual and ALL *.txt files
at least 5 times...

Hope you did NOT do that...

Juergen

AT&T Bell Labs Acoustics Research Dep. Murray Hill, NJ