🚀 go-pugleaf

In article <RAZDAN.90Feb8162702@chanakya.oakhill.uucp> you write:
> 
>    Two questions to make things clear:
> 
> (a) How do I specify "vt100" on a command line.  For example I want to invoke
>    xterm from a shell (or twm menu)
> 
>    xterm -geometry 100x50 is what I would do normally.
> 

 Try:  xterm -geometry 100x50 -tn vt100 

 This will set the TERM env. variable to be vt100.  Be forwarned that 
 the vt100 termcap entry has settings for an 80x24 screen.  Most of 
 your editing will be mucked up.  (ie: not take advantage of your
 screen size)  There is an xterm termcap entry in the sources for xterm.
 Have your system administrator install this in the termcap database.


>    Also how can I put it in my default file (which would be .XTerm in $HOME)
>    Say for example I want to set geometry of a xterm window called Window1. 
>    Do I say
>    XTerm*Window1*vt100.geometry: 30x23.  In particular "xterm*vt100.geometry"
>    option is not clear.  Sorry for asking a dumb(?) question.

  Not dumb at all.  There are two things you must know.  

      1) how to tell the client which resources are his/hers, and

      2) how to set the resources so that client picks them up.

  For the first, use the "-name" option on the commandline to tell xterm
  which instances(?) of resources to grab from the resource database.

  Then you use that name in your resource file to define the resources
  that you want for that client.  Example:

     xterm -name XTerm-wind1 .......

   Then in your resource file:

     XTerm-wind1*VT100.geometry:  80x32

   As far as the "xterm*vt100.geometry:" suggestion...  In R4 xterms,
   there is menu widget below the VT100 widget that also has a geometry
   specification.  In the case of the menu widget, a "standard" VT100
   geometry of 80x32 would make the menus window 80x32 *pixels* in size.
   These are fairly difficult to read....

   Many people, myself included, had geometry specifications of:

     xterm*geometry:  80x40 

     or
      
     xterm*VT100*geometry: 80x40

   This would match the menu's requirements as well.  By using:

    xterm*VT100.geometry:  80x40

   You explictly set the (for lack of a better word) *regular* xterm
   window to 80x40 and the menu windows will size themselves according
   the the font used.  The "." after the VT100 is all important in this
   case.
> 
> (b)  Refer to original question (a) I have simmilar problems with all the
>      clients that use athena widgets.  For example the initial window of xman
>     or the menu buttons of xmh also have humongous windows.  Surprisingly
>     this thng is not noticed on other work stations running the same
copy of clients.
>     I do not have a clue as to what environ variable or some thing
else I may be setting
>     or not setting.
> 

   Probably the same sort of thing.  Check those resources as well.  
   Outside of this, you really need to read the man pages for the
   clients you expect to be using.  When I first started I found it
   useful to pick one client and continually set resources and see the
   results.

Hope this helps,
-PWM
------------------------------------------------------------------
Peter W. Morreale                  email:  morreale@ncar.ucar.edu
Nat'l Center for Atmos Research    voice:  (303) 497-1293
Scientific Computing Division     
Consulting Office
------------------------------------------------------------------