🚀 go-pugleaf

>I recently bought a Sun 3/60, used. It's framebuffer seems to be configured
>(When it boots, it SAYS it...) to be bwtwo1. MOST Sun 3/60s that I know of
>are configured to be bwtwo0

Easy:  You have a motherboard that was sold from the factory as a color (cg4)
system.  Such boards save a couple of bucks by omitting the on-board bwtwo1.
Someone later must have switched the cg4 with a P4-bus bwtwo1.

Orrrrrrrrrr, you *do* have an on-board bwtwo0, but also have a cgfour that
you're not telling us about.


>Here's the problem: Whenever I try to run Xsun, I get the following error:

>Fatal server error:
>no screens found

>/dev/fb and /dev/bwtwo0 exist, but Xsun gives the same messages when told
>to use those. I fooled around with mknod'ing my own bwtwo1, but with little
>success. 

Try removing /dev/bwtwo0 and any other /dev entries for fb's that you don't
have.

-- 

======================================================================8--<