🚀 go-pugleaf

>
> I should know the answer to this problem; but I never wrote it down and now
> I forgot :(    At one time, I thought it was a problem with scologin, and
> recommended to those affected to try stock MIT xdm (which we use here anyway,
> ripped from a previous version of ODT).
>
> For now, check to make sure that you are NOT listing the Xterminals in
> some kind of Xservers file on the host (typically /usr/lib/X11/xdm/Xservers,
> but is something else in sco using scologin).  XDMCP replaces the Xservers
> file, which is long obsolete (for everything except starting XDM on
> the console Xserver).
>

I am pulling my hair out on this problem. with the scologin on our development
system it never locks up. BUt on the product it does.

There are no entries in the Xserver file, so thats not the problem. With
Xconfig: DisplayManager*debugLevel:          1
set up is applears to hang during the password verification. Here is the log:

<478> In open_pty, ttydev=/dev/ttyp0 ptydev=/dev/ptyp0 ut_line=ttyp0
<478>  returned line is  user=(null) pid=-6404 type=1
<478> UPS, opened ttyp0
<478> setutmp: ut_line(ttyp0) ut_user(LOGIN) ut_pid(478)
<478> verify passswd failed
<478> set_utmp() type(7) user(operx) pid(478)<478> Its a user/dead process syste
<478> Its a user/dead process run-level 2 1
<478> Its a user/dead process  8
<478> Its a user/dead process old time 3
<478> Its a user/dead process new time 4
<478> Its a user/dead process  8
<478> Its a user/dead process  8
<478> Its a user/dead process  8
<478> Its a user/dead process  8
<478> Its a user/dead process  8
<478> Its a user/dead process tty01 7
<478> Its a user/dead process tty02 6
<478> Its a user/dead process tty03 6
<478> Its a user/dead process tty04 6
<478> Its a user/dead process  5
<478> Its a user/dead process tty1A 6
<478> Its a user/dead process tty2A 6
<478> Its a user/dead process ttyr001 6
<478> Its a user/dead process ttyr002 6
<478> Its a user/dead process  8
<478> Its a user/dead process  8
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  8
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process  5
<478> Its a user/dead process ttyp0 6
<478> Done here
<478> UPS - is_pwd_ok() name=operx ttydev =/dev/ttyp0

any help would be much appreciated, esp. what is it doing here?
Trying to verify the login and failing???

Tom Smop Ostberg  508/262-3204
**** its just a Simple Matter Of Programming ***
Ring Medical Inc., 85 Rangeway Rd., N.Billerica, Ma. 01862