SLC 5/05 Ethernet Connection

Article View: control.sendsys

Article #3

From: Aaron Zarse
Date: Mon, 10 Aug 1998 00:00

13 lines
1327 bytes

I have been using a PC to communicate with a SLC 5/05 controller via the
ethernet port on the controller.  I am running Windows NT 4.0 and connecting
with the SLC through a local area network using a hub.  Communication with
the SLC works fine when using the hub and LAN but I need to eliminate the
use of the hub and connect with the SLC using a single cable from my PC.  I
have attempted making the connection with a straight cable and what I
believe is a standard crossover cable for ethernet.  neither of these cables
have worked and I am wondering if there are any changes that need to be made
to the networking setup in windows or if a single cable can replace the hub
and work.  If anyone has any experience with this type of application please
contact me at

    azarse@rsa.net

Technical Details

Message-ID: <SUEz1.602$HV3.5178747@nntp0.milwaukee.wi.ameritech.net>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: fa22d,3199109cae0a02f4,start
X-Google-Attributes: gidfa22d,public
From: "Aaron Zarse" <azarse@rsa.net>
Subject: SLC 5/05 Ethernet Connection
Date: 1998/08/10
Message-ID: <SUEz1.602$HV3.5178747@nntp0.milwaukee.wi.ameritech.net>
X-Deja-AN: 379735577
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4
Organization: Ameritech.Net www.ameritech.net  Complaints: abuse@ameritech.net
NNTP-Posting-Date: Mon, 10 Aug 1998 11:07:14 CDT
Newsgroups: control.sendsys