🚀 go-pugleaf

Hey
I have the same problem.  My CDRom is on a scsi chain.  It works fine with
MS CD player but not anything else.  Actually, with other programs, they
don't recognize the drive existence.  I thought it was MS 2k that was the
problem.  What is your OS?

"Arindam Roy" <arindamr@usa.net> wrote in message
news:9cmnic$abo$1@news.creativelabs.com...
> Hi,
>
> Neither PlayCenter nor PlayCenter2 recognizes the Audio CD in the DVD
Drive.
> I can't see any tracks in the CD. However I don't have any problems using
> Winamp or JetAudio Players. I have the following configuration
>
> PIII 777 MHz - MSI Motherboard MS-6337
> 256 MB RAM
> 20 + 4.3 GB HDD (Primary Master & Primary Slave)
> Aser 1040A 10X DVD Drive (I used a firmware flash to make it RPC1. Now the
> Drive is detected as Pioneer DVD-114F. This drive is connected to the
sound
> card using the CD Audio Cable, Connected as Secondary Master)
> Iomega CD-RW (8x - 4x - 32x,  Not Connected to the Sound Card with CD
Audio
> Cable, Connected as Secondary Slave)
> SoundBlaster Live!Value (with Digital Out)
> DXR3 Decoder Card (I am able to play DVD without any problems using PC DVD
> Player which came along with the DXR3 card)
>
>
> Thanks in advance
>
> Arindam
>
>
>
>