🚀 go-pugleaf

Mr Mark Kahrs,

My joystick work's but my Scsi card is failed. Its the driver of my Scsi
card that work's or the driver of creative but not the two driver in the
same time !!!
Help, I have forced a interupt 9 for my Scsi card but when I reboot my Pc,
the driver go to Interrupt 11 (The same that creative). This problem not
appear with the last version of creative driver !!! The Joystick work's but
I lost my Scsi card.

Best regard
Vanerck Micha�l <vanerck@brutele.be> a �crit dans le message :
985mgr$cj1$1@news.creativelabs.com...
> Hi,
>
> I have installed lw30full_9x , the latest version of LiveWare(3.0) (28 Mb)
> He reinstall all the drivers and my joystick work's.
> Thank's creative.
>
> Mark Kahrs (Creative Labs) <mkahrs@clok.creaf.com> a �crit dans le message
:
> 980f79$jc4$1@news.creativelabs.com...
> >     Make sure you have the latest software update for Microsoft
Joysticks.
> > The version you need is ver. 3.02  at:
> >
http://www.microsoft.com/products/hardware/sidewinder/profiler/default.htm
> .
> > Also make sure you have the sblw9xup.exe update and LiveWare3.0
installed
> > from our website:
> > http://www.creativehelp.com/files/download.asp?OS=Win98&prod=sblive
> These
> > updates will usually get the joystick connected.  If they do not, try
the
> > steps below.
> >
> >  Try going to the Control Panel > Joystick/Game Controllers > and
> installing
> > the joystick as a 2-button 2-axis controller and then rebooting.
> >
> >  If the difficulty still exists, then on some models of cards the
resource
> > settings for the gameport can be changed by doing the following steps:
> >
> >  1.  Go to the Control Panel > System > Device Manager > Sound,  video
and
> > game controllers.
> >
> >  2.  There should only be one device listed for the Gameport, and it
could
> > be either:
> >
> >  Creative Gameport Joystick
> >     or
> >  Gameport Joystick
> >
> >       If any extra devices are listed, then please remove all of them
and
> > click the Refresh button so that  only the gameport on the  sound card
> will
> > be reinstalled.
> >
> >  3.  Double click on the Gameport Joystick device.
> >
> >  4.  Go to the resources tab.
> >
> >  5.  Uncheck the Use automatic settings box.
> >
> >  6.  Change the Setting based on Basic configuration to 0001, if this
> > options exists.
> >
> >  7.  Highlight the Input/Output Range and click on the Change Setting
> > button.
> >
> >  8.  You may now be able to change the I/O range for the card.
> >
> >  9.  After making the changes, click on the OK button at the bottom.
> >
> > 10.  Say YES to the Windows prompt about making a forced configuration
of
> > your settings.
> >
> > 11.  Reboot your computer if prompted.
> >
> >
> > Vanerck Micha�l <vanerck@brutele.be> wrote in message
> > news:97te0b$dm3$1@news.creativelabs.com...
> > > Help,
> > >
> > > I have install the last version of the game controller of Microsft and
> my
> > > Sidewinder joystick is not recognised by Windows 98(Or creative ?)
> > > Help, I have installed directx 8.0a and i have the same problem.
> > >
> > > Best regards.
> > >
> > >
> >
> >
>
>